She had exactly 1" clearance from the head to the glass on this D15Z1 VTEC-E that's going in my project '89 HF
The magic was getting the downpipe to clear AND not ramming the glass w/ the head while loading w/ a frontloader
No front end collisions please, I like the back of my head intact just fine, thanks
A second gen driver's door WILL fit it you don't have any interior and you wedge it sideways-like w/ the pass. seat down
It was harder/heavier than it looks
The latest stuffing...3 years worth of accumilated parts in one load...had to take the passenger seat out to make room, the beast was packed
claustrophobia anyone?
Not pictured: The load before this consisted of 2 first gen doors stacked on their side, two door glasses w/ foam in between, misc. interior pieces, two full rads, and a tranny w/ the linkage still attached (bitch pin...grrr) that I took to Therealtime's shop for safe keeping til I sell it off. Thanks Tony and Mike!
Show us your overhaulin' adventures...Mak
Edited by MakDiesel, 18 March 2007 - 01:22 AM.