I will be doing a ZC swap to the 84 CRX I am buying, I am going to use the CRX tranny and I am going to regear it, my question is: Will ANY D series flywheel bolt up to the ZC or D16a1? Do i have to buy one strictly for that motor? I am currently looking into the Fidanza clutch that weighs 7.5 pounds and it is meant for newer SOHC D series engines...90-2000 it says. Any direction?
James
0
Flywheel Question
Started by b16a87crxsi, Jun 03 2007 05:02 PM
8 replies to this topic
#1
Posted 03 June 2007 - 05:02 PM
#2
Posted 03 June 2007 - 05:25 PM
I didn't think that the crx tranny would mount to the zc.
Conceal nothing... And watch the fools search forever!
#3
Posted 03 June 2007 - 09:08 PM
everything I have read has said that the CRX tranny will bolt to the d16a1 and i thought the ZC was just the jdm version of that. at any rate will any D series flywheel bolt up to a ZC or D16A1?
#4
Posted 03 June 2007 - 09:43 PM
QUOTE (b16a87crxsi @ Jun 3 2007, 07:08 PM) <{POST_SNAPBACK}>
everything I have read has said that the CRX tranny will bolt to the d16a1
You might want to go back and re-read.
FWIK, the USDM 1g CRX tranny will NOT bolt up to the D16A1, ZC or otherwise
#5
Posted 03 June 2007 - 10:06 PM
#6
Posted 03 June 2007 - 10:14 PM
QUOTE (b16a87crxsi @ Jun 3 2007, 08:06 PM) <{POST_SNAPBACK}>
okay, what about my second question, what flywheel will i need to go with?
The D16A1 flywheel to go w/the D16A1 motor and D16A1 tranny...I don't know the alpha-numeric code for the D16A1 tranny, but I'm sure someone here will chime in shortly.
#7
Posted 04 June 2007 - 05:54 AM
The 90+ D series will not fit. You need a flywheel for a 86-89 Integra. The only place I was able to find a lightweight aluminum flywheel was from Summit Racing, where I got mine.
Once a woman is introduced to Colonel Angus, she'll settle for nothing less.
#8
Posted 06 June 2007 - 10:12 PM
I found a Toda clutch/flywheel kit I am looking at. I hear Toda is good, and the flywheel is only 7.5 lbs.
#9
Posted 06 June 2007 - 10:41 PM
QUOTE (kakabox @ Jun 3 2007, 08:14 PM) <{POST_SNAPBACK}>
The D16A1 flywheel to go w/the D16A1 motor and D16A1 tranny...I don't know the alpha-numeric code for the D16A1 tranny, but I'm sure someone here will chime in shortly.
hey, kakabox, you have that code in one of the pics of your tranny after you cleaned it. it is a cg trans.
when i got my zc, i checked between an ew block and the cg tranny, and only 3 or 4 of the bolts line up, which would be very unsafe in my opinion.
as far as the question about the toda clutch, i have never heard of it, but as long as it is for a zc/d16a1, and is the friction material you want, i say go for it
"You play hard to get, I play hard to get rid of" Fez, That 70's Show
my website if you need parts for your car, and i don't have them at on my website, just pm me. I can get most of the common parts for our cars.
my vouch thread
my website if you need parts for your car, and i don't have them at on my website, just pm me. I can get most of the common parts for our cars.
my vouch thread