Holy Sphericals Batman!
EuphoricBlue 02 Aug 2011
QUOTE (cahitapower @ Aug 2 2011, 06:28 PM) <{POST_SNAPBACK}>
I was just wondering, because if you aint going to make them any more and someone needs to replace it..there pretty much done for...
I will re-read this thread again may have missed something..thanks
I will re-read this thread again may have missed something..thanks
The trick to his kit wasn't that he used spherical barrings, it's that he mounted the barrings in removable sleeves instead of rigging them directly into the subframe. There is nothing (AFAIK) stopping an owner from removing the assemblies, replacing the barrings, and re-installing them.
Remember, he didn't make the barrings, he made the sleeves. The barrings are standard, off the shelf units which can be gotten at any good barring supplier.
firstgencrx 02 Aug 2011
QUOTE (cahitapower @ Aug 2 2011, 07:28 PM) <{POST_SNAPBACK}>
I was just wondering, because if you aint going to make them any more and someone needs to replace it..there pretty much done for...
I will re-read this thread again may have missed something..thanks
I will re-read this thread again may have missed something..thanks
I have always stood behind my work, and I always give more customer service than most are used to.
Just because I don't make kit for these cars any more does not mean I am not available to help someone repair something they purchased from me. In most cases, I repair stuff for free.
Look, I know you really wanted this kit. I'm sorry you are not able to buy one.
David
zakats 02 Aug 2011
I suppose it's on to greener pastures as far as making automotive products- maybe to a niche of people who are used to paying exorbitant sums of money for parts.... say BMW and Mercedes enthusiast
My gf's dad spends hefty sums of money for odd and difficult to find mercedes w123 parts, just a thought
too bad David, too few of us really deserved your products. If only you knew how to half-ass
My gf's dad spends hefty sums of money for odd and difficult to find mercedes w123 parts, just a thought
too bad David, too few of us really deserved your products. If only you knew how to half-ass
firstgencrx 02 Aug 2011
QUOTE (zakats @ Aug 2 2011, 09:43 PM) <{POST_SNAPBACK}>
I suppose it's on to greener pastures as far as making automotive products- maybe to a niche of people who are used to paying exorbitant sums of money for parts.... say BMW and Mercedes enthusiast
My gf's dad spends hefty sums of money for odd and difficult to find mercedes w123 parts, just a thought
too bad David, too few of us really deserved your products. If only you knew how to half-ass
My gf's dad spends hefty sums of money for odd and difficult to find mercedes w123 parts, just a thought
too bad David, too few of us really deserved your products. If only you knew how to half-ass
Thanks for your kind works. But I'm not making parts for any one else but myself. I'm finding that I'm not really built for the whole "Mass Production" thing. I love creating stuff, and working through the problems of basic development. It's the making part that I find no fun. I'm using my infrastructure to satisfy my own needs. Its fun to walk down to the shop and have very few obstacles in the way of me creating what I want.
At the moment, I'm collecting the materials to set up a small foundry to cast some aluminum parts. I even found a free, dead water heater on Craig's List I'm using for the shell of my furnace. I have this idea for an intake manifold for the H22 project...
I've been super busy building all kinds of stuff lately. I would share more of what I'm working on, but it's all completely off topic.
David
masterpenguin 03 Aug 2011
I would still be interested in what you are working on Haha. I love fabricating and engineering no matter what it applies to, still awesome to see what people can think up and build with their hands.
-rob
Edited by masterpenguin, 03 August 2011 - 12:33 AM.
-rob
Edited by masterpenguin, 03 August 2011 - 12:33 AM.
toxicshit 08 Aug 2011
hey david, thanks for the nice parts that you sold to me the last years! and the exelent spare parts service. i still love to see some production pics of the new stuff so we can try to make some stuff ourselves/
Acre's Hatch 15 Mar 2018
This is such a deep read! Wow. Any feed back regarding realtime benefits of bushings or traction bar for daily use? Are any of these parts still available?
GeezRX 15 Mar 2018
This is such a deep read! Wow. Any feed back regarding realtime benefits of bushings or traction bar for daily use? Are any of these parts still available?
Sadly, not from firstgencrx any longer, but you can get maybe the next best thing here: http://www.cheddasau...87-civic-cr-x-2 Can't believe you aren't already aware of his products?