Cheddajsauto Shifter Bushing Link Kit
chedda_j 01 Feb 2011
The kits are going to be sold via acadian motorsports after the second set is completed.
There are 20 kits available through acadian motorsports. Reason for selling them through him is really just to improve shipping times for you guys in the states. He will have 20 onhand at all times to ready to ship. These 20 kits will be available from A.M in about two weeks, but purchases are stilll accepted on this page, but you will be recieving the product from A.M directly not from myself.
These UHMW (Ultra High Molecular Weight Polypropelyene) bushings will reduce nearly all play in the shifters linkages to allow for more precise shifts with less misses and grinds.
These are now up for ordering. You can purchase them fully through paypal. The email is [email protected]. The orders will be made as soon as possible and most likely be shipped out right after.
how to
Paypal
Heres a couple comparison pictures.
Kit would include:
2 Transmission mount link bushings
4 U joint bushings
2 Shifter bushings
3 Stainless steel bolts
3 Nylock Nuts
1 fender washer for Transmission Link
Price: Kits are $35 -USA
I urg all of you guys to spend the time and get some new bushings in these linkages. If they are anything like my old ones, you will see a huge difference with replacing them.
Paid (strike out means sent)
Deivioncrx
Old School Rex
1986 Civic Si
ArenD
Anjin (3 sets)
Sxpkpower (3 sets)
Stuckey85si
Mikakey (g1teg.org) (2 sets)
Euro86-si (g1teg.org)
Koshir
Geezrx (2 sets)
MinkelR (g1teg.org)
zygspeed
alexm86
Russell
Second Set (closed) 13 sets
JEA86
Zakats
Zyspeed
Mikakey
Old school teg (4 sets)
Colin17 (2 sets)
87g1teger
93hpcrx
VapourPararnioa
There are 20 kits available through acadian motorsports. Reason for selling them through him is really just to improve shipping times for you guys in the states. He will have 20 onhand at all times to ready to ship. These 20 kits will be available from A.M in about two weeks, but purchases are stilll accepted on this page, but you will be recieving the product from A.M directly not from myself.
These UHMW (Ultra High Molecular Weight Polypropelyene) bushings will reduce nearly all play in the shifters linkages to allow for more precise shifts with less misses and grinds.
These are now up for ordering. You can purchase them fully through paypal. The email is [email protected]. The orders will be made as soon as possible and most likely be shipped out right after.
how to
Paypal
Heres a couple comparison pictures.
Kit would include:
2 Transmission mount link bushings
4 U joint bushings
2 Shifter bushings
3 Stainless steel bolts
3 Nylock Nuts
1 fender washer for Transmission Link
Price: Kits are $35 -USA
I urg all of you guys to spend the time and get some new bushings in these linkages. If they are anything like my old ones, you will see a huge difference with replacing them.
Paid (strike out means sent)
Old School Rex
1986 Civic Si
ArenD
Anjin (3 sets)
Sxpkpower (3 sets)
Stuckey85si
Mikakey (g1teg.org) (2 sets)
Euro86-si (g1teg.org)
Koshir
Geezrx (2 sets)
MinkelR (g1teg.org)
zygspeed
alexm86
Russell
Second Set (closed) 13 sets
Zakats
Zyspeed
Mikakey
Old school teg (4 sets)
Colin17 (2 sets)
87g1teger
93hpcrx
VapourPararnioa
anjin 01 Feb 2011
I'll be done if I have an idea on postage to Western Australia for three sets. What is the weight?
chedda_j 01 Feb 2011
For three sets in total it will cost 95 dollars shipped to anywhere in australia.
koshir 01 Feb 2011
how much to Slovenia,EUROPE ?
can be put in the bubble envelope I don't mind as long as they get here.
Thanks
can be put in the bubble envelope I don't mind as long as they get here.
Thanks
chedda_j 01 Feb 2011
QUOTE (koshir @ Feb 1 2011, 02:52 PM) <{POST_SNAPBACK}>
how much to Slovenia,EUROPE ?
can be put in the bubble envelope I don't mind as long as they get here.
Thanks
can be put in the bubble envelope I don't mind as long as they get here.
Thanks
About 10 dollars extra so $38 if shipped in an envelope, thanks.
sxpkpower 01 Feb 2011
I have been trying to figure out what to do with the worn out u-joint bushings for a long time. This is timed perfectly with getting winter projects wrapped up. Thanks, can't wait to get them installed.
chedda_j 01 Feb 2011
Thanks guys, I'll be purchasing all the materials tomorrow. I get all the stainless hardware right away and the uhmw will come the day after. With couple solid days at the shop I'll have the majority of the bushings complete.
chedda_j 02 Feb 2011
QUOTE (Stuckey85si @ Feb 1 2011, 06:31 PM) <{POST_SNAPBACK}>
Im tired of the floppy shifter!
Money sent.
Money sent.
I hear that.
Hopefully I can get this up to 20 sets before ordering materials, anyone else?