Jump to content




New Rims And Tires


  • You cannot reply to this topic
2 replies to this topic

#1
hypo_xz

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 86 crx si
I was wondering what would the offset be of the wheel? The choices are +35 and +45.

What's a good rim size to get for the rex with some tokico hp?
I am looking at the wheel sizes and there are too many to choice from?

Any suggestions?

Please let me know.

#2
tjbizzo

  • pumice my corns
  • PipPipPipPip
    • Group: 2013 Contributor
    • Location:Raleigh, NC
    • Drives: 87 CRX Si Crapmobile
I personally would go with +45. Stock offset for the 14" alloys is +40, and the 13" steelies are either +40 or +45, I'm not sure which. You can always use a spacer to move a higher offset wheel out more if you need to, but if you have rubbing problems you can't move a lower offset wheel in more.
Posted Image

#3
rpr

  • giggidy giggidy giggidy!
  • PipPipPipPipPipPip
    • Group: Super Administrators
    • Location:Erin ON, CA
    • Drives: Race: yeah right, who has time to race (2008 Civic Si, when I have time), Daily: 2006 Ridgeline
    • Image Gallery
    Garage View Garage
Your shocks have practically no relation to your tire/wheel selection, for the street anyway. As mentioned get a +45 offset. I would recommend a 15x6 wheel with 195/50-15's for the street, if you are looking for a largish wheel.
"Toby, you are a thief of joy"