So is this thing going to Dallas or not?
4
*sinic's* Build Thread
Started by zakats, Jul 30 2009 02:45 AM
78 replies to this topic
#76
Posted 25 June 2010 - 02:45 AM
#77
Posted 27 June 2010 - 09:17 PM
A/C works thanks to the gulf coast meet. Feels great. Just have to figure out how to get this blower to push harder.
Zac (please put this info on the front page)
1984 Honda Civic Hatchback
Specs
-Before
1.3 carb
4 speed
Stock
-Now
Motor:
1.6 EW SOHC
32/36 Weber kit
Home brew head port
DX outer springs
85 Si cam
Si distributor
Brown top pistons
NPR rings
Arp rod nuts
New water pump
EW Head gasket
Full gasket set
Solid Polyurethane Mounts
NGK plugs
Wire tuck (wires behind dash)
Battery relocation (rear hatch)
Small lawn battery (250 ccas)
Powder coated VC
180F Thermostat
Transmission:
Rebuilt Si transmission
Phantom grip LSD
Egay stage 1 clutch
New shift linkage bushings
Interior:
Black dash
Black interior
Si cluster (0 miles Counts with new motor)
New o-rings in a/c
A/c ducts redone
Exterior:
LS mesh (195/50/r15)
RSX rear springs cut
Torsion bars lowered
Classic Auto plates
Limo Tint all around
Estimated completion date: 7/7/11
Zac (please put this info on the front page)
1984 Honda Civic Hatchback
Specs
-Before
1.3 carb
4 speed
Stock
-Now
Motor:
1.6 EW SOHC
32/36 Weber kit
Home brew head port
DX outer springs
85 Si cam
Si distributor
Brown top pistons
NPR rings
Arp rod nuts
New water pump
EW Head gasket
Full gasket set
Solid Polyurethane Mounts
NGK plugs
Wire tuck (wires behind dash)
Battery relocation (rear hatch)
Small lawn battery (250 ccas)
Powder coated VC
180F Thermostat
Transmission:
Rebuilt Si transmission
Phantom grip LSD
Egay stage 1 clutch
New shift linkage bushings
Interior:
Black dash
Black interior
Si cluster (0 miles Counts with new motor)
New o-rings in a/c
A/c ducts redone
Exterior:
LS mesh (195/50/r15)
RSX rear springs cut
Torsion bars lowered
Classic Auto plates
Limo Tint all around
Estimated completion date: 7/7/11
#78
Posted 28 June 2010 - 12:00 AM
Done... but I changed 1.6 to 75mm since it isn't quite 1.6 without the D16 crank
He who dies with the most toys, wins.
#79
Posted 12 March 2011 - 08:54 PM
I want another but an si this time. I have 40 bucks on my paypal