QUOTE (badpenny @ Oct 2 2006, 02:30 PM)
Because there was someone not more than a week ago sold what you are looking for, it had been forsale for 3 weeks, and its now in TX, thats why, plus you didn't define where you were in your profile so, I thought I would ask.
On the repro, bit. I hope you do find one. And I hope you do get copies made. We all do.
good look'n out. keep my email handy should you come across another.
[email protected]We are real serious about producing these for this community. Thanx for the heads up on the profile issue. making adjustments now... thanx
I might even be as inclined to not only purchase a wing from someone here but also offer them a free CF version of it in exchange depending on if the demand is great enough here. Win/Win situation.
So in short, If the demand is great enough(minimum pre-purchased/8+ buyers), who ever sells me the original could potentialy end up with a free CF version.
Basicly, all the pre-buys would recieve about a 25% off list.(limited to the first 8 buyers only!) Any other purchases made there after pays full retail.
This is a prety common practice in tuner/specialty type forums.
We've had hoods, fuel pump covers and door panel inserts made for us in this fashion. It turns out to be positive for those that cooperate.
Realisticly, I see this wing MSRPing for $300ish per unit.
However, I have yet to see the underside or mounting points.
This may be an issue as to why no one has reproduced it.
The physical contours from the out-side don't appear extravegant and should not give a problem producing the mold.
It may have a different method of mounting once completed.
ah yes,... and before anyone asks. turn around time would be approximately 6-8 weeks on the initial first batch order.
Edited by JEM MotorSports, 02 October 2006 - 05:17 PM.