For my install I cut 1.5" square stock to fit the axle and drilled it for Energy Suspension universal sway bar bushings. I then welded the new mounting brackets to the axle.
https://drive.google...?usp=drive_link
https://drive.google...?usp=drive_link
The factory dodge hangers were welded to the frame just ahead of the factory tow hooks. The caravan hangers have built in tow hooks so the factory units can be removed. The sway bar links must be extended to be 10" long center to center.
https://drive.google...?usp=drive_link
https://drive.google...?usp=drive_link
All other details are covered in previous posts. If you search make sure you try the terms ARB or anti-roll bar as some users preferred this lingo.
Edited by armegedon667, 01 September 2023 - 08:35 PM.