Hey, I have a 85 dx ew1.
I had some vac problems a few months ago and think I messed with the air screw instead of the idle when I was fucking with it once I fixed the vac leak.. Well today I found out my 02 sensor has been unplugged for however long and I plugged it back in and it doesn't seem to idle anymore cold and when I adjusted the idle back to run, when it got hot it would idle even higher... So I think I need to readjust the air mixture, does anyone have any stock specs???
I live in Arizona if that helps
1
Stock Air Fuel Mixture Screw Position
Started by AlexCine7d, Aug 11 2013 06:44 PM
1 reply to this topic
#1
Posted 11 August 2013 - 06:44 PM
#2
Posted 27 August 2013 - 10:52 AM
Which one did you touch? Pict .... is more than helpful!
There is no air screw on those carb as per the usual standards, unless you have a canadian model.
This is the whole deal, the carb is more an air delivery controlled system with a zillion adjusters for an air jet.
You may have a vacuum leak due to a broken, cracked or disconnected hose(s)
There is no air screw on those carb as per the usual standards, unless you have a canadian model.
This is the whole deal, the carb is more an air delivery controlled system with a zillion adjusters for an air jet.
You may have a vacuum leak due to a broken, cracked or disconnected hose(s)