so, i have to pull the frame on my car and i was wondering if anybody else had it done and how much it costed them. I keep wanting to call someplace about prices but i always forget, we do framework at the shop i work at but they wont let me bring in my car because they are bastards.
1
Frame Pull
Started by zeroclearance, May 10 2005 07:34 PM
2 replies to this topic
#1
Posted 10 May 2005 - 07:34 PM
#2
Posted 11 May 2005 - 04:06 AM
I have been doing frame work for a while now (28 years) and the average for shops are usually 2 hours for setup time and measuring on the frame machine, 1 hour for each pull required and add repair time if there are kinks in the frame rails. Hourly shop rates vary a lot depending on location and facilities.(Here in B.C., labor rates vary from 53.00 - 66.00 per hour.)
Ed
86 Crx DX EW3 block EW2 ported head , Coltcams (nitrous/turbo Stage 2 Triflow )
T-25 with a blowthrough Keihin carb - 13 psi .
I'ma in the Carburetion Nation
86 Crx DX EW3 block EW2 ported head , Coltcams (nitrous/turbo Stage 2 Triflow )
T-25 with a blowthrough Keihin carb - 13 psi .
I'ma in the Carburetion Nation