okay so i forgot to put it up but here it is im post the pic n il tell u guys what to cap n wat not too.
![Posted Image](http://farm8.staticflickr.com/7126/8167758848_a42e6d65cd_b.jpg)
cap;
A, 3
leave uncap
1,2,B
follow this n ur good for the front lines.
![Posted Image](http://farm9.staticflickr.com/8339/8245090968_00cdc5bb07_b.jpg)
![Posted Image](http://farm9.staticflickr.com/8061/8167760052_62d45c8fab_b.jpg)
here 5 is your fuel line
C,7,8 are left uncap
cap;
3,6
n u know wat to do about 4.
![Posted Image](http://farm8.staticflickr.com/7280/8167730867_3350a505a4_b.jpg)
okay if u are using ur air jet controller. that is the thing with three lines. this helps from flooding ur carb with gas. then ...
cap;
9, 14
run a hose from 12 to 13 making a U shape.
D goes to 7 on the intake manifold not the carb.
![Posted Image](http://farm8.staticflickr.com/7107/8167760982_9f49ba4735_b.jpg)
last side is
14,15 are uncap
cap;
16,17,A
make sure to double check ur work!!!
![Posted Image](http://farm8.staticflickr.com/7265/8169538901_107f7cc363_b.jpg)
cap;
1.2
uncap;
3,4,5,6
n 7 goes to D on the back of the carb.
also cap 8 on the manifold bottom pic
![Posted Image](http://farm9.staticflickr.com/8063/8245182820_a2618d9ba8_b.jpg)
this is ur air jet controller n it needs to be hook up. NO FLOODING!!!!
![Posted Image](http://farm9.staticflickr.com/8349/8244111217_c608c6e95b_b.jpg)
A to 11
B to 10
C to 2
that should be everything, its better to use new vacuum lines so u know that none of ur lines are cracked. also on the manifold i made sure that the caps wouldnt come off by using small hose clamps instead of zip ties. just a better option to me. u can leave ur valves on but i was going for a cleaner look so i went with block of plates; u can make ur own but unless u make some thick ones ur better off buying the ones KAYMO has here. another thing is the base plate insulter on the carb make sure it has no cracks bcuz those are notorious for leaks. if ur on a budget>>>then silicone is ur best friend.coat it on both side like a skin just make sure u let it cure 24 hours.before use. other that that u shud be good. GOOD LUCK on anyone trying it out.
ps this is not for California bcuz of smog. unless u can find someone to do u a favor u will never pass. sorry.
any questions let me know il check from time to time here if not PM me.
![Posted Image](http://farm9.staticflickr.com/8481/8228884800_74efff44f2_h.jpg)