I'm going to a SI head later this week, hopefully..
(just can't find a "regrinder" for the cam that's NOT 300.00+!!)
e
I'm going to a SI head later this week, hopefully..
(just can't find a "regrinder" for the cam that's NOT 300.00+!!)
e
From what I remember, the cable/housing turns 180deg and it will come out. .....SO, one can angle it to the right or left 'cause it really doesn't matter which way you have it routed (after you put it back in the fire wall and turn it back 180deg to lock it in) on a NON-SI intake (US ones though) since the cvcc port is inbetween the primary and secondary ports of the base, from what I remember seeing.
What I did was to use a larger COTTER PIN, put accelerator cable through cotter pin, slide 'legs' of pin through plate, and expand legs to hold the cable to plate
and I didnt' have to cut the end "T" off the stock cable.
OK, OK don't get all excited.. The cotter pin isn't going to be the safest for long term use. I planed on just doing a head swap (SI) until I took a trip to Nashville
and burnt about a gal of oil. Now it looks like more of a rebuild with teg pistons, lightened flywheel/HD clutch and some other stuff.
Don't know if that makes sense to you
I'll try and post some pics later.
Errol