If you can't find someone to take that motor off your hands elsewhere, I'm sure that there are a number of people here that would buy it.
1
3G Si Turbo Build
Started by odz-fab, Feb 05 2016 10:42 PM
45 replies to this topic
#31
Posted 18 March 2016 - 05:57 PM
#32
Posted 18 March 2016 - 08:47 PM
Hey brother! What type of wheel size and off set are you running to fit with the wilwood brakes? My wheels i got dont fit so trying to find out what set is needed
these are 15x7 32 offset I believe..
#33
Posted 18 March 2016 - 08:48 PM
If you can't find someone to take that motor off your hands elsewhere, I'm sure that there are a number of people here that would buy it.
yea its pretty much up for grabs or I was thinking off saving it all for a nice stock swap in another shell down the road
#34
Posted 21 March 2016 - 07:42 PM
Hey man found some rims that are 16x7 with off set of 40 think that will fit the fronts?
B20 86 CIVIC IN CONSTRUCTION
#35
Posted 21 March 2016 - 08:34 PM
#36
Posted 21 March 2016 - 11:44 PM
ok cool that's good news lol because the rims I have which I really like sadly are -30 off set so it sucks lol
B20 86 CIVIC IN CONSTRUCTION
#37
Posted 28 March 2016 - 11:11 PM
#38
Posted 06 April 2016 - 12:15 AM
#39
Posted 22 April 2016 - 01:59 PM
#40
Posted 03 February 2017 - 12:31 AM
Welp finally got some updates lol
I'm ditching the kpro conversion , simply put too many variables that will make for headaches when it comes time to tune or troubleshoot.
Going with the aem infinity and the rywire cam/crank triggers to go coil on plug
Drive by wire throttlebody for traction control with a rear wheel speed sensor.
Ordered a new eg/D.C. Driver side engine mount to weld in the engine mounts to the frame just like the rywire 3G civic.
I'm ditching the kpro conversion , simply put too many variables that will make for headaches when it comes time to tune or troubleshoot.
Going with the aem infinity and the rywire cam/crank triggers to go coil on plug
Drive by wire throttlebody for traction control with a rear wheel speed sensor.
Ordered a new eg/D.C. Driver side engine mount to weld in the engine mounts to the frame just like the rywire 3G civic.
#41
Posted 03 February 2017 - 12:37 AM
#42
Posted 10 February 2017 - 01:25 AM
A lot of progress as well parts coming in. Hush22 slave cylinder
Made an oil feed to the rocker arms since I blocked off the vtec solinoid
Aem infinity ecu and rywire cam and crank trigger...which means I'm abandoning the kpro idea. All well this is much cooler anyways.
And cut the timing cover to fit
Made an oil feed to the rocker arms since I blocked off the vtec solinoid
Aem infinity ecu and rywire cam and crank trigger...which means I'm abandoning the kpro idea. All well this is much cooler anyways.
And cut the timing cover to fit
- CRXer87hf likes this
#43
Posted 22 February 2017 - 12:47 AM
#44
Posted 22 February 2017 - 10:27 PM
#45
Posted 23 February 2017 - 12:52 AM
Don't get discouraged...we're here, watching, enjoying your build posts...keep 'em coming!
"Old and usually in the way" - Check out my '86 3G build in "VIEW GARAGE"