Hey Guys. The car just got shot for a mag and I was able to get some pics myself. Hope you like them!
3
My 3g K20 Civic
Started by G AE82, Aug 30 2006 06:34 AM
50 replies to this topic
#1
Posted 30 August 2006 - 06:34 AM
1986 Civic with B16A
13.80 @ 98 mph
1985 Civic with K20a
11.67 @ 116.55 mph
All Motor FWD street tire record in Australia
Fastest pump fuel ALL MOTOR FWD in Australia
13.80 @ 98 mph
1985 Civic with K20a
11.67 @ 116.55 mph
All Motor FWD street tire record in Australia
Fastest pump fuel ALL MOTOR FWD in Australia
#2
Posted 30 August 2006 - 07:02 AM
man thats clean and so cool with the K20A in there, might want to drop the suspension a few notches, do you have any vids of it running down the strip and what is it like trying to get traction with that thing?
#3
Posted 30 August 2006 - 07:25 AM
MORE!!! I really want to see a low shoot from the front/center. It look awesome though.
Screech
------------------------
16 Ford RS (2.3l, DS)
84 Civic 2000S (B20Z2 2.0l, SMF)
#4
Posted 30 August 2006 - 07:42 AM
nice pics what magazine was it for ?
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#5
Posted 30 August 2006 - 07:51 AM
I'd like to see this and brymans cars go head to head...lol That k20 car might win....TOM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#6
Posted 30 August 2006 - 08:49 AM
you know we need a writeup on this swap right?
very clean ride, i bet it goes like stink too!!
it would look much better much closer to the ground though....
very clean ride, i bet it goes like stink too!!
it would look much better much closer to the ground though....
#7
Posted 30 August 2006 - 09:09 AM
QUOTE (JeepGirl @ Aug 30 2006, 08:49 AM)
I dont know some ppls stink is kinda backed up...!
Then again some ppls stink is so fast they cant stop
#8
Posted 30 August 2006 - 09:29 AM
QUOTE (JeepGirl @ Aug 30 2006, 08:49 AM)
you know we need a writeup on this swap right?
damn straight, especially since I hope to have a swap for my EP sometime real soon. might as well put the k20a3 in my 86.
wes g.
#9
Posted 30 August 2006 - 09:30 AM
QUOTE (ibcnya @ Aug 30 2006, 08:09 AM)
I dont know some ppls stink is kinda backed up...!
Then again some ppls stink is so fast they cant stop
Then again some ppls stink is so fast they cant stop
i say that because thats what my parents used to say about things that went fast.... like my dads 240z and his 5.0L 1G civic, they both "went like stink!!" *shrugs*
#10
Posted 30 August 2006 - 09:31 AM
Did you guys find a axle combination that can hold up and doesnt break after two or three runs?
#11
Posted 30 August 2006 - 11:38 AM
Looks clean....but id either do some lowering, or put the stock oem wheels if you are going for that sleeper look.
my opinion of course
my opinion of course
#12
Posted 30 August 2006 - 11:58 AM
I'd bet its not lowered due to the height issue with the engine/oilpan on the K series!!
Looks awesome as it is!
Looks awesome as it is!
Full of The Internets!
etmydst - ""...and since he was the hardest gangster in all of stockton they were to scared to go in his house so they drove by and said "slow down forest"..."
My Vouch Thread
etmydst - ""...and since he was the hardest gangster in all of stockton they were to scared to go in his house so they drove by and said "slow down forest"..."
My Vouch Thread
#13
Posted 30 August 2006 - 12:08 PM
QUOTE (Xipher @ Aug 30 2006, 09:58 AM)
I'd bet its not lowered due to the height issue with the engine/oilpan on the K series!!
Looks awesome as it is!
Looks awesome as it is!
+1, i was thinking it would look sweet lowered, but you cant really go that fast when your oil pan is scraping the ground now can you?
#14
Posted 30 August 2006 - 02:49 PM
yeah that's what i thought. lowering would most likely have oil pan scaping issues.
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#15
Posted 30 August 2006 - 03:14 PM
yeah that K20 sits pretty low in there, the k20 second gen we saw at crx-po the engine was high and they had to use a JDM hood and cut it at that... so I bet that thing is hanging lowwwww.. how much would you charge to do this swap in someones car??LOL??hmmmm...