i will be getting the car saturday/sunday, most everything is up for grabs....but first a few details
chassis kinda rusty on bottom, i dont think its salvageable
header panel broken
fenders broken
previous owner put motor out of time, bent most valves, head is suppose to be new.-ran fine before that.
carpet gone
black interior
front and rear suspension/hubs spoken for
radiatior gone
other than that, its just an 85 si that has just "exhisted" for the past few years.
post up if you are interested in something, anything, and what you'll give for it (within reason), i'll check the condition of it and let you know. Want a few things, sure, i'll cut you a deal.
so to recap, basicaly everything is up for grabs, including but not limited to trans, mounts intake mani, wiper arms, wiper motors, ecu, vaccum box, exhause mani, interior trim/panels (black i think), dash, a/c controls, mirrors, rims, sun roof, engine wiring harness, chassis harness, glass, doors, hatch, fuel lines, fuel tank, marker lenses(if they arent broken), gauge cluster, clock, window regulators, steering column, .....etc....
1
Parting Out 85 Crx Si
Started by bridgework1812, Jun 17 2005 08:00 PM
33 replies to this topic
#1
Posted 17 June 2005 - 08:00 PM
#2
Posted 17 June 2005 - 08:50 PM
I know this has been asked time before and yet again, But will a crx si tank fit on a si or even a dx civic? The reason I ask this is I have searched but found all but that question answered. Secondly the yards here have more rexs than 3g si's and I mean 3 to 1.
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#3
Posted 17 June 2005 - 10:52 PM
#4
Posted 18 June 2005 - 10:49 AM
I need the wind deflector that pops up when you open the sunroof. It's held on by a pin and C-clip on either end. LMK
Robert
Robert
#5
Posted 18 June 2005 - 11:08 AM
can you cut off the headlight plugs + another 3-4 inches of wire for me? also, i might need the drivers side spindle (if all four studs are intact)
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.
#6
Posted 18 June 2005 - 12:56 PM
I just noticed you in OK, what city are you in?
I might be interested in the hatch too if it still has the spoiler on it. What color is it?
I might be interested in the hatch too if it still has the spoiler on it. What color is it?
#7
Posted 18 June 2005 - 02:03 PM
QUOTE (1gencrx @ Jun 18 2005, 12:56 PM)
I just noticed you in OK, what city are you in?
I might be interested in the hatch too if it still has the spoiler on it. What color is it?
I might be interested in the hatch too if it still has the spoiler on it. What color is it?
its blue or black...i dont remember...i'll get the exact color tonight when i move it..still has the spoiler on it..I'm in norman, but the car will be moved to my shop in okc
as for everybody elses request, i'm going to begin tearing it down tommorow, i'll get condition of the parts you've asked about and pics....
La Forza del Destino
#8
Posted 18 June 2005 - 02:31 PM
#9
Posted 18 June 2005 - 04:04 PM
QUOTE (kevsCRX @ Jun 18 2005, 02:31 PM)
did the AC work? Intrested in the compresser.
i dont know, i didnt ask and he didnt say so i'll sell it cheap, no warranty or guarantee
La Forza del Destino
#10
Posted 18 June 2005 - 08:53 PM
#11
Posted 20 June 2005 - 05:46 PM
i'm at work right now, i'll be responding to everybodys pms and questions when i get home tonight...also with pics...
La Forza del Destino
#12
Posted 20 June 2005 - 09:39 PM
Ok kids, here we go
85SiHybrid
rear speaker covers...well, uh one is missing the screen, the other is there...not that great shape, i dont think you'd want them.
1gencrx
i forgot to look for that piece, i'll try to remember tommorow when i get back up to my shop.
staticchmbr
i'm not going to cut up the harness for those....you can buy the entire harness...or i might have my dx chassis harness, which would be cheaper.
1gencrx
black, 2 hole/pushed in marks on the spoiler....the other one i have in the mugen bar/spoiler thread is in better shape.
as you can see, the tails are ok, one side is cracked....
more pics
finish is starting to come off, one is slightly bent, can be fixed, still holds air
as for the factory fogs and lip spoiler....i dont know, i'd like to keep em, but if a good number is hit, then i'll sell them. What is that number? I dont know right now, but i bet i'll know if i hear it.
post up if you have any other questions.
85SiHybrid
rear speaker covers...well, uh one is missing the screen, the other is there...not that great shape, i dont think you'd want them.
1gencrx
i forgot to look for that piece, i'll try to remember tommorow when i get back up to my shop.
staticchmbr
i'm not going to cut up the harness for those....you can buy the entire harness...or i might have my dx chassis harness, which would be cheaper.
1gencrx
black, 2 hole/pushed in marks on the spoiler....the other one i have in the mugen bar/spoiler thread is in better shape.
as you can see, the tails are ok, one side is cracked....
more pics
finish is starting to come off, one is slightly bent, can be fixed, still holds air
as for the factory fogs and lip spoiler....i dont know, i'd like to keep em, but if a good number is hit, then i'll sell them. What is that number? I dont know right now, but i bet i'll know if i hear it.
post up if you have any other questions.
La Forza del Destino
#13
Posted 20 June 2005 - 10:23 PM
i want, no i need the gauge cluster. how much?
SportInjectedClubvisit my myspace SAHCR Member
if your offended by anything i post, you need to seriously get a life
#14
Posted 20 June 2005 - 10:32 PM
QUOTE (jeff420 @ Jun 20 2005, 10:23 PM)
i want, no i need the gauge cluster. how much?
i dunno, i have two of em...pm me what you'll give for one....
La Forza del Destino
#15
Posted 21 June 2005 - 12:18 AM
There is a waiting period, but you have Pm, and I do understand if you get a better #
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.