82 replies to this topic

[B20vtec86crx]

went to the track sunday 8-8-04 ..the first couple runs 12.3,12.2,12.1,12.2,and11.8
on chipped 28 ecu ..the car is pretty much untune .. cams set @0 ..im getting the car tune sept 5 hopefuly i can get to run low 11's..60ft 1.7s and 1.6s

set up -
ls vtec 85 mm 12.5 :1 cr with 1 lyer head gasket
b16 head ef-1 springs and tit retainers rs cams pnp by cc import
an-r header aebs intakemanifold 68mm throttle body

suspesion -
front- koni adjustable
rear- QA1
cc import traction bars

[bryman10]

Dude,
That's impressive I'm hoping to have numbers like that when I get ULT1GCRX on some slicks...

bryman

[Bluelight]

Very impressive! Great job. We're you running open header?
And what did the car weigh in at if you don't mind me asking?

cheers.

[xThexHeadx]

How did you conquer the VSS problem? using HF cluster VSS?

[B20vtec86crx]

yes i'm running open header ..my crx was Si running ob1 , the car weight cough cough cough 1780 lbs cough with driver

Edited by B20vtec86crx, 10 August 2004 - 06:28 PM.

[civtrx]

wicked! That's honestly crazy...you're running constant 12's on an all motor LS/VTEC set-up un-tuned let alone you got into the 11's!

You'll hear of pretty much no one on Honda-Tech or somewhere like that that's been running that kind of times with an LS/VTEC set-up in their civic or CRX any generation higher then the 1st/3rd gen's.....at least I haven't on an almost stock build like that.


congrats man!

Edited by civtrx, 10 August 2004 - 07:11 PM.

[Aren D.]

oh my thats fast.

[B20vtec86crx]

wicked! That's honestly crazy...you're running constant 12's on an all motor LS/VTEC set-up un-tuned let alone you got into the 11's!

You'll hear of pretty much no one on Honda-Tech or somewhere like that that's been running that kind of times with an LS/VTEC set-up in their civic or CRX any generation higher then the 1st/3rd gen's.....at least I haven't on an almost stock build like that.


congrats man! 

i haven't post on ht yet not until sept 18-19 ..battle of import ..lol

[demon2180]

sweet that is great times hope i get down to that all motor when i start building my b18c5 up yeah

[Hart-n-Sol]

Nice numbers man. Got any pics? Where did u get your traction bars from?

[B20vtec86crx]

http://racingroadtri...04/index_3.html


my car (silver86 crx)is the only first gen out there ..the yellow crx was built us too ..that's running 12.3

www.redpepperracing.com/gallery/album49

i built the traction bars seem to work ok

Edited by B20vtec86crx, 11 August 2004 - 12:57 PM.

[Hart-n-Sol]

http://racingroadtri...04/index_3.html


my car (silver86 crx)is the only first gen out there  ..the yellow crx was built us too ..that's running 12.3

www.redpepperracing.com/gallery/album49
 
i built the traction bars  seem to work ok

Very nice. Looks like you have quite a bit of work into this car.

[B20vtec86crx]

http://racingroadtri...04/index_3.html


my car (silver86 crx)is the only first gen out there  ..the yellow crx was built us too ..that's running 12.3

www.redpepperracing.com/gallery/album49
 
i built the traction bars  seem to work ok

Very nice. Looks like you have quite a bit of work into this car.

thanks...
most of it are work and sweat ...i have about 5k into the whole car and motor

Edited by B20vtec86crx, 11 August 2004 - 06:28 PM.

[EF9 VTEC]

Congratulations man. Very impresive times an millage

At what rpm's are you launching?

Ive seen some 1G CRX and 3G Civic's with LS/VTEC here in Puerto Rico running 11's and 12's. I think there is a 1G CRX running in the 10's but I dont know the setup(N/A, Turbo or NOS).

Keep up the good work

[B20vtec86crx]

i launched at 5500rpm ..sometime 6000+rpm if i have a good burn out