50 replies to this topic

[funkmaster]

Ok, so I didnt sell the car as a whole, so I guess ill part it.
If anyone is interested in a rolling chassis, let me know.
The car does have some rust holes (not too big) in the front floor boards, and a very small one behind the drivers seat. The panhard mount is solid. There is some very slight rust in the rear.

Im going to list all of the parts I have for the car, and my asking price for them. All prices are negotiable, and dibs will go to ppl that ask for the parts first. PLEASE do not call dibs if you are not ready to buy these parts NOW. I dont want ppl asking for dibs then not coughing up the dough for 6 months. I intend to have this car parted in a short time frame. Dibs called will be honored for one week, longer if the buyer works it out with me individually.

Any questions can be asked in this thread, through PM, or Email at [email protected]. You may also call me at 513-227-8968, my name is Ryan.
ON WITH THE LIST!

Engine:Currently Shahriar35 has dibs on the ENTIRE engine
d16a1
bored .30 over
forged dome top pistons
-Bottom end will be sold complete. Includes: Block, forged rods and pistons, balanced crankshaft, oil pan. $350

Gude racing head package incuding:
-throttle body $150 Tyrone 2nd dibs
-cams $200
-intake manifold $200 Tyrone 2nd dibs
-ported & polished head $500
-titanium valve springs $100 Chaos325 2nd dibs
AEM Tru-time Cam gears - $125
-I would prefer to keep this head package complete. IT was $1650 new from Gude.
If sold complete it will come with the polished valve cover and AEM gears. $1000

DC sports 4-2-1 ceramic header $250
MSD 6al (not installed yet) $100 lilneedle
MSD Blaster 2 coil $50 (not installed yet)
Unorthodox racing Crank Pulley $100 (not installed yet) lilneedle
Centerforce Dual Friction clutch LESS THAN 5,000 MILES ON THIS $100
Dynomax hi-flow catalytic converter $50
Megs Racetip "muffler" $30
2.25" custom bent pipes $30 local pickup only
BRAND NEW in box Centerforce Dual friction clutch with NIB throwout bearing. $200
NEW in box Integra timing belt $15
Integra shift linkage $25
Engine mounts, for d16a1 swap $50
NEW radiator $50 Local pickup preferred
87 integra 5spd ECU $50
87 CRX si ECU $30
89 Integra ECU, with SMARTCHIPS reprogramming (this ECU would be suited for NOS or Turbo Apps. LOTS of extra fuel) $50


Suspension:
85 Prelude Master Cylinder $25 (comes with booster attached)
Earls SS brake hoses $150 for front and rear. Airgazm, 1genCRX (2nd)
87-89 integra brakes front $50
87-89 integra brakes rear $100
integra proportioning valve $25
If someone wants the whole brake setup including the proportioning valve I will sell it for $275. Note this will not come with rotors, they are rusted to shit.

Tokico Illuminas front $150
Tokico HP shocks rear $100
27.5mm torsion bars $150 SALE PENDING
Full polyurethane bushing kit - Only sold with rolling chassis, im not going thru the PITA to remove this!
Lightspeed rear antiswaybar $100 SALE PENDING
OPM adjustable panhard bar $100 SALE PENDING
Eibach pro-kit springs - NFS with part out, unless with rolling chassis.
MonkeyzTek Coilover kit with #400 linear rate springs NEW IN BOX $125
Integra axles bought NEW when swap done $50 each. $80 for pair.

Interior:
Autopower 6pt roll cage $300, its black, bolt in, and a little nicked up.
MOMO pedals - NFS with part out, unless with rolling chassis.
MOMO shiftknob
DC sports Short shifter
- these 2 parts sold as one unit. When I got the DC shifter teh threads were messed up beyond repair, but the MOMO knob uses set screws so it works perfectly. $100 for the pair. Drag13honda, Grant87crxsi(2nd)
Custom aluminum door panels - NFS with part out, unless with rolling chassis.
140mph Speedo
Custom aluminum gauge overlay
-Sold as one piece, $50. ODO shows just over 4,000 miles. I reset this when I installed the engine.
Autometer oil pressure gauge $25
Autometer air/fuel ratio gauge $25
Simpson 5pt harness $25 (old and NOT race legal)
stripped interior
Grant GT steering wheel red with black center, includes mount. $30

Misc. parts:
87 integra engine/trans. Complete! comes with harness, distributor, starter, etc.
Needs a new clutch, and some gaskets.
$300, local pickup preferred.

Complete Gasket set for 86-89 d16a1. Includes a TON of gaskets, including the head gasket. NEW! $50

BODY panels from the 87 will be available, as will some interior parts. Let me know what you might want. The drivers front fender is slightly cracked, the header panel is gone, the hood is hail dented, the sunroof is NICE. Most of the interior is gone. Hatch is very nice also.

DX front lip?, painted silver $20

I have decided to KEEP my Integra LS wheels, and sell the wheels off my 85.
They are Motegi MR-7s in Gunmetal. Make an offer, they have tires currently, 2 like new pirelli p7000s 195/50/15, and 2 older mismatched 195/60/15s with decent tread. Will come with 16 Black tuner style lugnuts. BEST OFFER.

85si Cluster $40
5 gallon Aluminum fuel cell BRAND NEW SOLD TO POWERMANAF
Moroso Accumulator 2, 1.5 quart capacity, light-duty use, 13'' x 3''
Brand NEW $35

Thats all I can think of for now. Any buyers will pal ACTUAL chipping charges from Area Code 45246. International and palletized shipping is available but is not cheap.

Please note that I can accept PAYPAL, and since I am a verified premeir account holder, I can accept CREDIT CARD payments for all the items above!

Thanks for looking!

Edited by funkmaster, 03 October 2006 - 01:27 PM.

[1goldteg]

Put me down for the PHB, find out shipping to 34759, thanks

Mike

[1goldteg]

89Teg_Mike is interested in the T-Bars, you can ship them with the PHB to save on shipping, LMK

Mike

[1gencrx]

Dibs on rear sway bar. It will come with all the necessary mounting hardware right?

I'm also still interested in the brake lines, but your asking price seems a little high. Can you tell me more about them? Are they just the stock replacements for a teg? Or are they a custom set?

Thanks
Bobby

Edited by 1gencrx, 02 October 2006 - 09:01 AM.

[funkmaster]

1goldteg, sure I can combine shipping. Ill figure up the charges today.
Ill get you a final price for both parts plus shipping today.

1genCRX these are not OEM brake lines. They are Earls Stainless steel units and cost me over $225.

Yes the rear swaybar will come with the mounting hardware.

[DSK 86CRX]

dibs on torsion bars, let me know how you want payment

[funkmaster]

PHB and T-Bars are sale pending to 1GoldTeg.
Thanks!

Lets keep this thread at the top.
Cmon ppl this is a chance to get parts for your 1G you may never get again. I really dont want to put this stuff on EBAY!

[stevo911_]

Autometer oil pressure gauge, what model is it/whats it look like? (i want it to match my a/f) (maybe the a/f guage too)

[1gencrx]

1genCRX these are not OEM brake lines.  They are Earls Stainless steel units and cost me over $225.

<{POST_SNAPBACK}>

Right, I understand that, but they are made to the same dimensions as the stock lines correct? I find that running the OEM rubber rear lines are too short and you must keep the axle supported to keep from ripping them. How is the fit on these SS ones? Any chance you have a pic of them. I was planning on having some rears custom made to my likeing...

I'll take the rear sway bar though. Get it boxed up and a shipping quote to 32653. I can pay via paypal.

[funkmaster]

actually they are quite a bit longer than the stock units. I can take some pics for you. I dont know if they would reach the ground but its possible.

Ill get you a S&H quote today.

[funkmaster]

Stevo911, The A/F gauge is an ultralite and has a silver face.
The Oil gauge has a black face.

Both are 2 - 1/16" in diameter.
The O/P gauge will come in the pod if you want.

[tyrone]

dibs on steering wheel aswell, just want to see what happens with them gude bits im after first

cheers

[89teg_mike]

Are these civic or integra tbars?

If they are civic tbars then I have to get the civic torsion tubes in order to get them into my teg right?

Have they been "keyed"?

mike

[drag13honda]

i wanted dibs on the rear sway bar over in the post where you were trying to sell the whole car.

same post as the dc shifter

[crazi-85crx]

PM'd.