I put the black rims on and lowered the car finally. I think it looks pretty good so far...
The rest are here.
Some on page 1 as well.
2
I Took A Few New Pics.
Started by 87sivtec, Feb 08 2004 11:53 PM
16 replies to this topic
#1
Posted 08 February 2004 - 11:53 PM
#2
Posted 09 February 2004 - 12:01 AM
#3
Posted 09 February 2004 - 02:10 AM
#4
Posted 09 February 2004 - 03:49 AM
nice car man! what size are your rims? Also what shocks and springs did u use to lower the rear, ? u get any bounce from the front end ?
#5
Posted 09 February 2004 - 09:51 AM
#6
Posted 09 February 2004 - 12:50 PM
#7
Posted 09 February 2004 - 12:57 PM
#8
Posted 09 February 2004 - 09:12 PM
QUOTE (86CR-X @ Feb 9 2004, 12:49 AM)
nice car man! what size are your rims? Also what shocks and springs did u use to lower the rear, ? u get any bounce from the front end ?
15" w/ 205-50 Dunlops. I have the Tokiko blue shocks in the rear as well as the coilover setup that I had in my Si. I have pictures of that in my album here: Si album
The front is only lowered about 3/4 to 1 inch. I didn't measure before and after. The back is the stiff end for now. I have 450 lbs springs in there. The fronts are the soft HF torsion bars. I will soon put in the bushing kit and Tokiko shocks up front. That will help a lot.
twitter: @lylehatton
#9
Posted 09 February 2004 - 10:00 PM
#10
Posted 09 February 2004 - 10:03 PM
#11
Posted 09 February 2004 - 11:32 PM
That is VERY clean, I really like it man.
#12
Posted 11 February 2004 - 02:37 AM
Thats a super sweet car,Kyle!Looks good and it's gonna go good (can't wait to see her run at Mission with the B motor)
Ed
Ed
Ed
86 Crx DX EW3 block EW2 ported head , Coltcams (nitrous/turbo Stage 2 Triflow )
T-25 with a blowthrough Keihin carb - 13 psi .
I'ma in the Carburetion Nation
86 Crx DX EW3 block EW2 ported head , Coltcams (nitrous/turbo Stage 2 Triflow )
T-25 with a blowthrough Keihin carb - 13 psi .
I'ma in the Carburetion Nation
#13
Posted 11 February 2004 - 03:14 PM
#14
Posted 11 February 2004 - 08:00 PM
#15
Posted 12 February 2004 - 05:36 PM
Thanks. Pristine on camera anyways. It does have some flaws. Needs paint badly. The lighting and angles helped that out.
twitter: @lylehatton