anyone know where?I know Gude and Webcams but i want to at least do 14 seconds
0
Where To Get Some High Torque Cams?
Started by 10secCRX, Jun 23 2004 02:25 AM
7 replies to this topic
#1
Posted 23 June 2004 - 02:25 AM
#2
Posted 23 June 2004 - 08:40 AM
I don't think ANY cams will get you much more torque out of an N/A D16A1 unless you also change a lot of other things too. They might move the peak up or down the rev range some, but the peak number won't increase much. If you want big low end torque then start swapping in the 305 out of your Camaro. (you will need at least a big crowbar and an economy size jar of vaseline for this) If you want big high end torque then start reading up on turbo kits. If you want big torque and 14's out of an N/A D16A1 then you will need 13+:1 C/R + race gas + 4/1 race header and exhaust + dual sidedrafts + hot cams + race clutch + etc, etc. All of this is IMHO of course.
#3
Guest_-TJ_*
Posted 23 June 2004 - 09:46 AM
Cams alone won't give you any appreciable torque.
You either need more displacement or boost.
You either need more displacement or boost.
#4
Posted 23 June 2004 - 11:19 AM
http://www.webcamshafts.com
Dual sidedrafts, a header, exhaust, and hot cams in a d16a1 should easily get the car into the 14s, especially if you have a lighter chassis, such as an HF...
Dual sidedrafts, a header, exhaust, and hot cams in a d16a1 should easily get the car into the 14s, especially if you have a lighter chassis, such as an HF...
"If Honda does not race there is no Honda." -Soichiro Honda
#5
Posted 23 June 2004 - 12:34 PM
#6
Posted 23 June 2004 - 01:01 PM
I THINK I'm in the upper 14's with my car. Wont know untill next wed night when I run at the track, but I was right with car that does 14.5, and I've beaten a few cars that do low 15's sooo....
I got the 228 deg cams from Gude plus a throttle body from them. I also have an intake, 4 into one header (really impressed with this, got it from S&S Headers but I definately should have gotten it jet coated), 2 1/4 exhaust, and a UR underdrive pulley.
I got the 228 deg cams from Gude plus a throttle body from them. I also have an intake, 4 into one header (really impressed with this, got it from S&S Headers but I definately should have gotten it jet coated), 2 1/4 exhaust, and a UR underdrive pulley.
Brown Top ZC 85 Si
H22 97 Integra RS
SportInjectedClub
H22 97 Integra RS
SportInjectedClub
#7
Posted 23 June 2004 - 09:47 PM
I can't guarantee 14s, but I have a regrind cam from Delta Camchaft in Seattle that is 272 duration and .435 lift. Definately boosted the power and the price was right ($76.89). Might be a cheap way to get started towards your endeavor...
The doctor says my nose wouldn't bleed so much if I'd stop picking it.