Finished putting the panels and glove box back in. Looks really clean can not see any wires hanging down.
Setup the Hondata Kpro to output to my Solo2 DL. Two settings had to be activated and it is working perfectly. Setup 4 screens to display different information. First is lap time and best lap. Second is RPM and Speed, third is engine data like AFR, AIT, coolant temp, and Oil pressure. Forth screen is lateral, braking and acceleration forces.
Speedhut SpeedGuage is up and working. I’m using VSS for signal so it was very easy. Plugged in the provided GPS antenna and took it for a drive. It self calibrates as you drive. I was curious if I was going to be able to hear the motor turning the cable but I can’t hear anything. Then again it’s not a very quiet car to begin with.