Hello everyone!
I would like to present a 1987 Honda CRX 1gen K24/K20
I think it is the only such project in the world. The car is a fully street vehicle.
Well I will not bore, quick presentation and go to the pictures
1987 crx 1 gene
- Full restoration
- custom mounts
- The first specification- turbo B16a2
- The current specification K24 / K20
- K24 block
- K20 head
- BC Stage 2 cams
- Skunk springs and retainers
- K20 oil pump
- K-tuned header
- K20Z manifold inatke
- 440cc incjectors
- 72mm OBX throttle body
- Custom intake
- Hondata
- Competition clutch
and many many more
at the beginning (by the previous owner)
First setup
K- mounts
http://imagizer.imag.../540/uEw0nZ.jpg
http://imagizer.imag.../540/snqJJD.jpg
The first fitting and first engine K20
http://imagizer.imag.../673/EDJ3gj.jpg
http://imagizer.imag.../905/LgAEUD.jpg
so close
http://imagizer.imag.../673/asz9Fs.jpg
http://imagizer.imag.../901/35WOOi.jpg
http://imagizer.imag.../673/HM7YH9.jpg
inside
http://imagizer.imag.../905/qDaoEr.jpg
and then - new idea K24
http://imagizer.imag.../537/NlB9kS.jpg
http://imagizer.imag.../538/qYbyvX.jpg
http://imagizer.imag.../538/qn0KcL.jpg
http://imagizer.imag.../537/zfmW7A.jpg
http://imagizer.imag.../905/HfjxeY.jpg
wiring
http://imagizer.imag.../540/onGgJE.jpg
http://imagizer.imag.../538/Ful4LC.jpg
finishing
http://imagizer.imag.../905/ykmkmf.jpg
http://imagizer.imag.../901/GgmLmQ.jpg
http://imagizer.imag.../661/xWkyUY.jpg
http://imagizer.imag.../911/fmNcT6.jpg
http://imagizer.imag.../537/4TMsdv.jpg
http://imagizer.imag.../540/KHHEYi.jpg
http://imagizer.imag.../673/0MyOIu.jpg
comparison B16a2 vs K24/K20
http://imagizer.imag.../908/J6jPg2.jpg
first try - 13,9 on 195/50/15 street
http://imagizer.imag.../661/6QSXZb.jpg
http://imagizer.imag.../633/YAWe0b.jpg
http://imagizer.imag.../540/h8zgnZ.jpg
Feel free to comment
1 Gen Crx 1987 K24/20 Full Street
#1
Posted 21 May 2015 - 12:37 PM
- millcreek and theseventhsun like this
#2
Posted 21 May 2015 - 01:22 PM
man this thing looks awesome!! obviously had to weld in new mounting points, but what motor mounts did you use? any firewall issues? i'd totally rewire the car for a K20!!
Wheels
QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)
#3
Posted 22 May 2015 - 12:59 AM
Awesome job!!! Was wondering how much clearance there is between the ground and your oil pan?
#4
Posted 22 May 2015 - 03:16 AM
Mounts are made by my friend He drew it for cnc machine- completely own production and measurements
clearence- remember, this K24,
#5
Posted 22 May 2015 - 07:50 AM
#6
Posted 22 May 2015 - 09:14 AM
Mounts are made by my friend He drew it for cnc machine- completely own production and measurements
clearence- remember, this K24,
I was wondering...... I've seen others notch the rail on H22 swaps to bring it up a bit, but then there is the hood to deal with. Looks amazing though! Any chance your friend could make more mounts??
#7
Posted 23 May 2015 - 03:40 AM
I was wondering...... I've seen others notch the rail on H22 swaps to bring it up a bit, but then there is the hood to deal with. Looks amazing though! Any chance your friend could make more mounts??
I think that would be no problem
- SHOGUNOVDDRK and PuddleSkipper like this
#8
Posted 23 May 2015 - 09:24 AM
i'd be down for a set as well... i wouldn't be tackling this setup for quite some time, but i'd totally be down for collecting parts for it for a few years... picking up a CRX and tossing a K into it... it's gotta be a monster on the streets
Wheels
QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)
#9
Posted 08 November 2015 - 12:15 AM
I have a 1986 Civic, a 2003 CRV and a 2003 RSX. Sounds like I need to make one vehicle out of all three. Seriously, I would be interested in the mounts as well. I expect that would be one fast car.
#10
Posted 16 November 2015 - 02:51 PM
#11
Posted 17 November 2015 - 12:27 PM
#12
Posted 18 November 2015 - 09:57 AM
#13
Posted 18 November 2015 - 10:51 AM
so... any ideas on price? I've not really worked with metal and I know you factor in time to build as well as material and time engineering, but mounts seem ridiculously expensive for what you get. Will these be in the hasport range of price?