![F2AE6505-BCAD-446C-A619-B885D3A1C196_zps](http://i1046.photobucket.com/albums/b468/vmalchesky/F2AE6505-BCAD-446C-A619-B885D3A1C196_zpss2ukfayl.jpg)
![2C3C1734-B8ED-4E78-A56E-4E2671922D98_zps](http://i1046.photobucket.com/albums/b468/vmalchesky/2C3C1734-B8ED-4E78-A56E-4E2671922D98_zps5uibfbsv.jpg)
![9A912E42-5DEF-4300-80B2-327C26250FC2_zps](http://i1046.photobucket.com/albums/b468/vmalchesky/9A912E42-5DEF-4300-80B2-327C26250FC2_zps0xv3bmqt.jpg)
Edited by SHOGUNOVDDRK, 18 July 2015 - 04:59 PM.
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
Pad is in for the Tuff Shed that will be here in a bit over 4 weeks. So I will have a place for everything that has to come out to get the roof done. In the mean time. Front shocks are still at Koni getting a rebuild, just rebuilt HF steering rack and cross brace plates should be ready shortly. Hope to have those done before shocks get back. Since the front suspension and alignment will be a mess I think I will get some 29mm bars to see if I can flatten out the car a bit.
It is still just so stinking hot you do not want to be out in the garage any longer than you have to.
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
Edited by CSPCRX, 19 September 2015 - 11:33 PM.
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
Cross brace plates are at powder coater right now. Over the weekend I got the garage door lifted so I can put the car all the way up and leave the door open! AIR FLOW! If I get a chance I am going to measure the T-bars and order the 29s from Heal Toe. That will be the last part for the complete front end switch. New struts, new CC plates, new cross brace, new rack and new T-bars.
Here is a pic of the car all the way up and the door fully opened. Going to come in handy when the other cars are on the lift as well! Made the garage feel huge, kind of funny how the brain interprets things in that way. Also got a wall mount tire rack from Tire Rack, haha, to put my autocross tires on when not in use. Easy install had not put the tires in it yet. Adding a board along the base so it doesn't punch through the drywall.
Edited by CSPCRX, 13 October 2015 - 02:27 PM.
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
Awesome - that's the best tool in the shop IMO. I bought a very similar lift about 7 years ago and have never gone back to creepers and jackstands. Where'd you get the ramps? I've been rocking stacked 2x10's...
WANTED - See my posts in the WTB section
The old long term build which I can no longer edit since my original account broke a few years back.
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily