2 replies to this topic

[mikegort209]

Hey i bout new inner and outer tie rods for my 87 civic si.i wana change.them myself shops wants 130 r they easy to do looks like they screw in. I just change my liwer control arms and ball joints myself

[3rd gen sinner]

They are fairly easy. You will need to remove the bellow boots. Bend the retainer washer tabs back they are holding the inner tie rods from spinning, probably the hardest part. Take a long pair of plies, adjustable wrench, or the proper size wrench to loosen and remove the rod. Install new tie rod with new retainer washer and bend the tabs over, they ensure the rods don't back out. Reinstall the bellows and outer tie rods.

[mikegort209]

Thanks man ima do it next week