minus 10 hp
and bam... wilwoods and 15mm spacers installed. brakes still not done... need to be blead and pass side still needs to be installed.
with spacers in the tires look like:
Front.
rear.
9
Crx "smf" Project
Started by Aren D., Jun 06 2010 01:48 AM
234 replies to this topic
#31
Posted 12 June 2010 - 03:44 AM
#32
Posted 12 June 2010 - 10:42 PM
#33
Posted 13 June 2010 - 02:57 PM
Ok guys I have all my footwork done and installed. Now I can tinker with adjustments and enjoy a 1985 crx SI! This project was a huge success and a bunch of late nights. But totally worth it all.
Modifications:
body/areo-
One pice carbon fiber hood w/ hood pins and strut cut outs.
Passenger side mirror delete.
Roadracegear.com front lip
Aluminum rear bumper support and rear bumper air relieve mod.
EDM tail lights.
High out put head lights.
Rolled rear fenders.
Front suspension-
Tein mp dampers. Minus 4 clicks.
27.5mm torsion bars, reindexed.
new crx LCA
Polyurethane bushings.
Firstgencrx's bump steer corection kit.
Redpepperracing camber plates w/ inverted koni spacers. at -0.5 camber and 0 caster for now.
Arp wheel extened wheel studs.
Buddy club liteweight extended lugnuts.
H&R 15mm wheel spacers.
Stock front sway bar.
Rear suspension-
Tein mp dampers. Full firm.
375# rear springs.
Polyurethane bushings.
Redpepperracing panhard bar.
19mm rear swaybar, custom.
Stock internal rear torsion bar.
Arp extended wheel stucs
Buddy club liteweight extended lugnuts.
H&R 5mm wheel spacers
Wheels/tires-
Nito NT-01, 205/55/14 tread wear 100
Teamdynamic 14x7 wheels.
Brakes-
1989 Integra 7/8 master cylinder.
1989 Integra Proportioning Valve.
Front Fastbrakes.com wilwood 11.5" rotors, and 4 pistion calipers.
Front ss braided lines.
1989 Integra rear discs, and calipers.
Napa rear brake lines.
All dust sheilds removed.
PimpJuice-
Driveway special blackburn paint job.
Window tint.
1985 crx DX passager seat.
Redpepperracing shift knob.
Alpine iDA-X303 head unit.
Photo's:
.
.
.
.
.
.
well it looks like I am done for awile but I will be back with more modifications later!
Modifications:
body/areo-
One pice carbon fiber hood w/ hood pins and strut cut outs.
Passenger side mirror delete.
Roadracegear.com front lip
Aluminum rear bumper support and rear bumper air relieve mod.
EDM tail lights.
High out put head lights.
Rolled rear fenders.
Front suspension-
Tein mp dampers. Minus 4 clicks.
27.5mm torsion bars, reindexed.
new crx LCA
Polyurethane bushings.
Firstgencrx's bump steer corection kit.
Redpepperracing camber plates w/ inverted koni spacers. at -0.5 camber and 0 caster for now.
Arp wheel extened wheel studs.
Buddy club liteweight extended lugnuts.
H&R 15mm wheel spacers.
Stock front sway bar.
Rear suspension-
Tein mp dampers. Full firm.
375# rear springs.
Polyurethane bushings.
Redpepperracing panhard bar.
19mm rear swaybar, custom.
Stock internal rear torsion bar.
Arp extended wheel stucs
Buddy club liteweight extended lugnuts.
H&R 5mm wheel spacers
Wheels/tires-
Nito NT-01, 205/55/14 tread wear 100
Teamdynamic 14x7 wheels.
Brakes-
1989 Integra 7/8 master cylinder.
1989 Integra Proportioning Valve.
Front Fastbrakes.com wilwood 11.5" rotors, and 4 pistion calipers.
Front ss braided lines.
1989 Integra rear discs, and calipers.
Napa rear brake lines.
All dust sheilds removed.
PimpJuice-
Driveway special blackburn paint job.
Window tint.
1985 crx DX passager seat.
Redpepperracing shift knob.
Alpine iDA-X303 head unit.
Photo's:
.
.
.
.
.
.
well it looks like I am done for awile but I will be back with more modifications later!
#34
Posted 14 June 2010 - 09:55 AM
#35
Posted 14 June 2010 - 07:02 PM
Looks awesome!
What kind of powerplant do you have in that thing, anyway? Or is it super-secret?
Only thing negative I can say is that you have too much sidewall, maybe a lower profile 14" tire or move up to 15"s, but treadwear 100? Awesome.
Looks great, lots of goodies on that machine!
Cheers,
Mark
What kind of powerplant do you have in that thing, anyway? Or is it super-secret?
Only thing negative I can say is that you have too much sidewall, maybe a lower profile 14" tire or move up to 15"s, but treadwear 100? Awesome.
Looks great, lots of goodies on that machine!
Cheers,
Mark
#36
Posted 14 June 2010 - 08:48 PM
I think the tires look PERFECT! So mean, meaty, and capable looking and performing (I'm sure)!
Bet if he sprayed some tire gloss on them, the appearance would change dramatically, as it would "hide" some of that extra width.
Funkmaster has the same width on his MR5's, and I think they look great too!
Rampage, can definitely see what you mean as well though, as we are typically not used to seeing larger width tires on mag cars, or ANY 14" rims for that matter. Much love for 14's!
Bet if he sprayed some tire gloss on them, the appearance would change dramatically, as it would "hide" some of that extra width.
Funkmaster has the same width on his MR5's, and I think they look great too!
Rampage, can definitely see what you mean as well though, as we are typically not used to seeing larger width tires on mag cars, or ANY 14" rims for that matter. Much love for 14's!
WagoCats HOOOOOOOO!!!!!
#37
Posted 14 June 2010 - 10:25 PM
Thanks guys, and rampage like you said the side wall is a bit large... but these tires will be worn out in a month tops lol so I will be looking for some new 14's. but going with 15's may not be a bad idea, it is a stock si motor right now... but kirk(gtpilot) did some work for me awile back and I never got around to posting what is going on w/ that...
anyway I am prepareing for something. but I am not sure when because I dont want to down this car for too long and have in end up like my other CRX, that I think I gave up on...
installed Wide ban o2 today... something is going on... the water temp is also installed but its just a space saver untill I get an exhaust temp gague...
But really I need to stop working on this car right now... I am moving and need to drive it to CO friday!!!
also thanks og wagon for being my biggest fan!
And I installed some black body molding finally... I may still do red.
anyway I am prepareing for something. but I am not sure when because I dont want to down this car for too long and have in end up like my other CRX, that I think I gave up on...
installed Wide ban o2 today... something is going on... the water temp is also installed but its just a space saver untill I get an exhaust temp gague...
But really I need to stop working on this car right now... I am moving and need to drive it to CO friday!!!
also thanks og wagon for being my biggest fan!
And I installed some black body molding finally... I may still do red.
#38
Posted 15 June 2010 - 12:35 AM
total super duper badassedness!! (yes that is a word)
hey what 5 spokes are those you had on it?
hey what 5 spokes are those you had on it?
#39
Posted 15 June 2010 - 01:33 AM
QUOTE (Gant @ Jun 15 2010, 01:35 AM) <{POST_SNAPBACK}>
total super duper badassedness!! (yes that is a word)
hey what 5 spokes are those you had on it?
hey what 5 spokes are those you had on it?
I think they are momo star wheels, I am not sure tho... I need to do some research and see if they are.
#40
Posted 15 June 2010 - 01:37 AM
The car looks fantastic, and all this with "spare" parts basically. I dig the 911 hiding back there as well
#41
Posted 08 July 2010 - 02:01 PM
Ok update. I have been in denver for about 2 weeks
soooo quad webers?
J/k I just sold the ew weber set and now the d16a1 of furry is going to be built. I need to choose a camshaft set up though? what is a good gind for 40mm webers and 11.5 cr? mostly street duty but I wont be sorry if it idels like crap... I didnt choose a 1g crx for it luxuray after all. Anyone with suggestions?
engine credit where credit is due: airgazim awesome powder coat on valve cover!, gtpilot awesome head build and hook up with the race carbs.
soooo quad webers?
J/k I just sold the ew weber set and now the d16a1 of furry is going to be built. I need to choose a camshaft set up though? what is a good gind for 40mm webers and 11.5 cr? mostly street duty but I wont be sorry if it idels like crap... I didnt choose a 1g crx for it luxuray after all. Anyone with suggestions?
engine credit where credit is due: airgazim awesome powder coat on valve cover!, gtpilot awesome head build and hook up with the race carbs.
#42
Posted 08 July 2010 - 02:13 PM
some of the highlites for the engine head build: os valves, welded fuel injector notches for port matched IM, Full Port and valve job, race valves and valve springs/ TI retainers
I will get some shots of the block as soon as I get it back again... its built.
#43
Posted 08 July 2010 - 02:17 PM
#44
Posted 08 July 2010 - 03:14 PM
QUOTE (Aren D. @ Jul 8 2010, 01:13 PM) <{POST_SNAPBACK}>
Any one notice anything unusual in this picture?
Kirk
#45
Posted 08 July 2010 - 10:38 PM
QUOTE (gtpilot @ Jul 8 2010, 03:14 PM) <{POST_SNAPBACK}>
Any one notice anything unusual in this picture?
Kirk
Kirk
no casting marks? extra long bolts holding the valve cover on?
and it dosnt look very ported compared to the head sitting next to me