Excellent quality man
10
Si Type Spoiler Manufacturing Project From The U.k.
Started by andrew, Aug 28 2009 07:13 PM
137 replies to this topic
#31
Posted 05 September 2009 - 11:37 PM
QUOTE(SHOGUNOVDDRK;835304)
the import scene has kinda become like emo's.... its killing itself whilst looking overdressed and in drag
QUOTE(phyregod;835835)
Sig worthy. But mine is full.
#32
Posted 08 September 2009 - 04:41 PM
QUOTE (SHOGUNOVDDRK @ Sep 6 2009, 05:37 AM) <{POST_SNAPBACK}>
Excellent quality man
thanks for your interest
heres a few more photos of progress
i got the spoiler off the car and sanded round the edges
ive still the underside to finish
i still havnt heard from the government dept yet either
ill give them another couple of days
and ill phone them again
regards andrew
#33
Posted 08 September 2009 - 06:34 PM
what the thing next to the car that has the mugen decal?
and the spoiler looks sweet
and the spoiler looks sweet
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#34
Posted 08 September 2009 - 07:11 PM
QUOTE (Vicious @ Sep 9 2009, 12:34 AM) <{POST_SNAPBACK}>
what the thing next to the car that has the mugen decal?
and the spoiler looks sweet
and the spoiler looks sweet
its a modified suzuki sc100 coupe
it has a 1000cc engine in the rear
i made the nose cone for it too
just like im doing to my civic
its getting a toyota twincam 4age engine swap next summer
it will be frontengined front wheel drive
a 122 bhp engine in a 600 kg car
regards andarw
Edited by andrew, 08 September 2009 - 07:13 PM.
#35
Posted 10 September 2009 - 09:37 PM
amazing work!
Can you please build us 1G guys some fiberglass door plastics? Honda has forgotten about us....
Can you please build us 1G guys some fiberglass door plastics? Honda has forgotten about us....
WagoCats HOOOOOOOO!!!!!
#36
Posted 10 September 2009 - 10:05 PM
Looks truly remarkable. What a cool thread to browse..the more time I spend at RPR the more me likes!
#37
Posted 11 September 2009 - 12:28 AM
#38
Posted 11 September 2009 - 03:39 PM
QUOTE (OG Wagon @ Sep 11 2009, 03:37 AM) <{POST_SNAPBACK}>
amazing work!
Can you please build us 1G guys some fiberglass door plastics? Honda has forgotten about us....
Can you please build us 1G guys some fiberglass door plastics? Honda has forgotten about us....
hi og wagon
what do 1g door plastics look like
are they the plastic trims on the door at the b pillar
they must be different to 3g civics
regards andrew
#39
Posted 11 September 2009 - 03:45 PM
QUOTE (andrew @ Sep 11 2009, 04:39 PM) <{POST_SNAPBACK}>
hi og wagon
what do 1g door plastics look like
are they the plastic trims on the door at the b pillar
they must be different to 3g civics
regards andrew
what do 1g door plastics look like
are they the plastic trims on the door at the b pillar
they must be different to 3g civics
regards andrew
Hey man,
they are outer "skins" that cover the entire lower half of the door. They are plastic OEM pieces that ALWAYS crack, and there have never been (as far as I know) any aftermarket replacement pieces available. You would have the entire market, and if you made them in fiberglass, many 1G CRX owners would be forever grateful.
Can someone post up a pic for him of just a door skin? I don't have any here at work.
WagoCats HOOOOOOOO!!!!!
#40
Posted 11 September 2009 - 03:48 PM
#41
Posted 11 September 2009 - 05:28 PM
QUOTE (OG Wagon @ Sep 11 2009, 10:45 PM) <{POST_SNAPBACK}>
Hey man,
they are outer "skins" that cover the entire lower half of the door. They are plastic OEM pieces that ALWAYS crack, and there have never been (as far as I know) any aftermarket replacement pieces available. You would have the entire market, and if you made them in fiberglass, many 1G CRX owners would be forever grateful.
Can someone post up a pic for him of just a door skin? I don't have any here at work.
they are outer "skins" that cover the entire lower half of the door. They are plastic OEM pieces that ALWAYS crack, and there have never been (as far as I know) any aftermarket replacement pieces available. You would have the entire market, and if you made them in fiberglass, many 1G CRX owners would be forever grateful.
Can someone post up a pic for him of just a door skin? I don't have any here at work.
they hardly ever crack here, must be the temperature and your sun... fenders howerver...
#42
Posted 11 September 2009 - 09:31 PM
QUOTE (OG Wagon @ Sep 11 2009, 12:37 PM) <{POST_SNAPBACK}>
amazing work!
Can you please build us 1G guys some fiberglass door plastics? Honda has forgotten about us....
Can you please build us 1G guys some fiberglass door plastics? Honda has forgotten about us....
Front bumper bar lower lips - 1g/3g whould be nice if it can be done.
#43
Posted 20 September 2009 - 05:53 PM
QUOTE (BATRB-6 @ Sep 12 2009, 02:31 AM) <{POST_SNAPBACK}>
Front bumper bar lower lips - 1g/3g whould be nice if it can be done.
i think i could make front bumper spoilers
g1 door panels too if i had one 2 to mould from
ill see how it goes with the si type spoiler goes first
you never know
regards andrew
#44
Posted 20 September 2009 - 06:05 PM
heres a photo
the bottom surface has its last coat of resin applied
then i have to sand it and put it back on the car to radius the trailing edge
and apply a few coats of resin then sand it down ready for primer
the government dept has not contacted me so ive been given another contact in the dept of trade and industry to contact
they have a separate office that deals with exporting
so ill see how it goes
selling in the uk is sorted
i still dont have a price yet
it depends if my moulding is successfull or not
and if i have to get someone to mould them for me
so far so good
regards andrew
the bottom surface has its last coat of resin applied
then i have to sand it and put it back on the car to radius the trailing edge
and apply a few coats of resin then sand it down ready for primer
the government dept has not contacted me so ive been given another contact in the dept of trade and industry to contact
they have a separate office that deals with exporting
so ill see how it goes
selling in the uk is sorted
i still dont have a price yet
it depends if my moulding is successfull or not
and if i have to get someone to mould them for me
so far so good
regards andrew
Edited by andrew, 20 September 2009 - 06:06 PM.
#45
Posted 20 September 2009 - 11:22 PM
Wow, this is intense.
Equally impressive is your business ambition and work towards sorting out the shipping and part/labor costs to get it your product over here to the states.
Great work sir!!
Equally impressive is your business ambition and work towards sorting out the shipping and part/labor costs to get it your product over here to the states.
Great work sir!!
WagoCats HOOOOOOOO!!!!!