I can make small- medium sized parts with CNC ( computer- controlled) machining. The materials would be soft steel or aluminum; so no engine/ tranny internals. Tolerance +/- .005"
I should prolly be thinking in terms of a part that I can sell...since I'm broke!!!
A blueprint would be best....
Suggestions, please?
8
What Part Would You Have Made By Cnc Machining?
Started by d15a3power, Feb 21 2008 11:59 PM
46 replies to this topic
#1
Posted 21 February 2008 - 11:59 PM
#2
Posted 22 February 2008 - 12:05 AM
strut bar mounts !, just saying.... id be interested in getting some strutbar mounts and i could make the strut bar since i cant find it anywhere and when i do its sold....
SOME PEOPLE ARE LIKE SLINKIES.
THEY'RE NOT REALLY GOOD FOR
ANYTHING, BUT THEY STILL BRING A
SMILE TO YOUR FACE WHEN YOU PUSH
THEM DOWN A FLIGHT OF STAIRS.
THEY'RE NOT REALLY GOOD FOR
ANYTHING, BUT THEY STILL BRING A
SMILE TO YOUR FACE WHEN YOU PUSH
THEM DOWN A FLIGHT OF STAIRS.
#3
Posted 22 February 2008 - 12:13 AM
Simple is best!
I was thinking B16 throttle body adapter plates were being made @ one point? Battery tie downs, maybe billet window cranks... all occurred to me but I feel like I'm missing something!
I was thinking B16 throttle body adapter plates were being made @ one point? Battery tie downs, maybe billet window cranks... all occurred to me but I feel like I'm missing something!
May thru November only.
Rust never sleeps.
Rust never sleeps.
#4
Posted 22 February 2008 - 12:20 AM
id deffinetly be in the market for a battery tie-down.
SOME PEOPLE ARE LIKE SLINKIES.
THEY'RE NOT REALLY GOOD FOR
ANYTHING, BUT THEY STILL BRING A
SMILE TO YOUR FACE WHEN YOU PUSH
THEM DOWN A FLIGHT OF STAIRS.
THEY'RE NOT REALLY GOOD FOR
ANYTHING, BUT THEY STILL BRING A
SMILE TO YOUR FACE WHEN YOU PUSH
THEM DOWN A FLIGHT OF STAIRS.
#5
Posted 22 February 2008 - 01:15 AM
I thought about making a LS/B20 to B16/ITR intake manifold adaptor. I never looked into it hardcore but it could be fairly eazy.
#6
Posted 22 February 2008 - 02:51 AM
What about solid engine/tranny mounts? Wouldn't exactly need to be B series mounts, but I'm sure some of the Auto-X/Track/Drag guys would dig getting the power to the wheels, and the ground over some vibration...
Full of The Internets!
etmydst - ""...and since he was the hardest gangster in all of stockton they were to scared to go in his house so they drove by and said "slow down forest"..."
My Vouch Thread
etmydst - ""...and since he was the hardest gangster in all of stockton they were to scared to go in his house so they drove by and said "slow down forest"..."
My Vouch Thread
#7
Posted 22 February 2008 - 04:04 AM
cnc right mirror delete, hmmmm billet window cranks is a good idea... a nice bracket for mounting the integra brake lines on a crx trailing arm for the rear disk brake swap would be cool.
grimms mom
#8
Posted 22 February 2008 - 08:23 AM
#9
Posted 22 February 2008 - 08:31 AM
I vote for either a TB adapter to the OBD1/2 TB pattern, or an IM adapter to D series pattern.
"If Honda does not race there is no Honda." -Soichiro Honda
#10
Posted 22 February 2008 - 08:55 AM
An adapter to put an electronic advance distributor onto an EW motor for less than $350 dang dollars! I'd buy one tomorrow.
#11
Posted 22 February 2008 - 12:33 PM
with rpr logo on it
Josh
-part of the exclusive side license plate club
qouted from CarNutCertifies
Sex should be like a Civic; slow, obscene, and loud enough for the neighbors to hear
Pics of Build
Build Thread
-part of the exclusive side license plate club
qouted from CarNutCertifies
Sex should be like a Civic; slow, obscene, and loud enough for the neighbors to hear
Pics of Build
Build Thread
#12
Posted 22 February 2008 - 02:53 PM
QUOTE (Maine_Honda_Racer @ Feb 22 2008, 03:55 PM) <{POST_SNAPBACK}>
An adapter to put an electronic advance distributor onto an EW motor for less than $350 dang dollars! I'd buy one tomorrow.
Ok, i would take one in d16a1... Is that possible?? And if it, what model i can steal/rob it??
J-P
J-P
Civic dont't go fast, it's flying low...
Civic dont't go fast, it's flying low...
#13
Posted 22 February 2008 - 03:29 PM
I would like to buy some strut plate for the front that had a one inch higher mounting location to have more strut travel in the front
#14
Posted 22 February 2008 - 04:09 PM
QUOTE (Czezcho @ Feb 22 2008, 08:53 PM) <{POST_SNAPBACK}>
Ok, i would take one in d16a1... Is that possible?? And if it, what model i can steal/rob it??
you should be able to use one from the edm 4g civic or 2g crx 16 valve d16
J-P
you should be able to use one from the edm 4g civic or 2g crx 16 valve d16
J-P
QUOTE (1gcvcb18 @ Feb 22 2008, 09:29 PM) <{POST_SNAPBACK}>
I would like to buy some strut plate for the front that had a one inch higher mounting location to have more strut travel in the front
wiht a bearing instead of the rubber mount would be cool