5 replies to this topic

[a4x0n]

Hello,
I was at the junkyard for about an hour the other day trying to get one of the 1g integra throttle bodies off, and I couldn't get to the 2 lower bolts. How do you do it? Are they necessary for me to bolt back on after I get it off?

Thanks

[1gcvcb18]

Hello,
I was at the junkyard for about an hour the other day trying to get one of the 1g integra throttle bodies off, and I couldn't get to the 2 lower bolts. How do you do it? Are they necessary for me to bolt back on after I get it off?

Thanks

Yes you need to get them back on your intake manifold, if not you can have a vacuum leak and that sure suckkksss

[RexKrazy]

curse alot. that always works for me.


really tho. I don't remember. I rthink I used some kind of allen socket...maybe a lond one. with a ball end.

don't forget to curse.

[a4x0n]

I did curse a lot. 'cause I couldn't get the part off. It didn't work

oh yeah and the bolt is a 10mm I think, how'd you use an allen on it?

Edited by a4x0n, 06 July 2007 - 05:17 PM.

[icebox187]

use a long extension, 10mm and a 1/4" drive, if u still cant get it try a swivel tip

[RexKrazy]

ya, guess I forgot. ^ swivel tip good.