Jump to content




Upgraded Stuff On My Car, With Pics Finally


  • You cannot reply to this topic
20 replies to this topic

#1
RARECRX

  • Officially retired.
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Nor Cal
    • Drives: 1987 crx si,1985 CRX si, 2009 RS6,pimp'd out corolla,
    • Image Gallery
    Garage View Garage
Put some stuff on friday, First I took out my eibachs to get rid of that pesky 2" fender gap(I like the LOW look) and installed my g/c coilovers the RIGHT way, then put on my steel braided goodridge lines on all 4 corners, with new LIGHTSPEED crossdrilled rotors, and new brake pads, and DOT 5 fluid. we flushed and bled the whole system..I also installed 2 new tokico front struts (I had x-tra's with the brake brackets) so i took the old ones without the brackets off, as i did not want the steel braided lines dangling around or zip tied.. also here are other pics of my recently installed DC sports "new in box " header and also the lightspeed rear swaybar that was recently installed.. what a day.. just thought I would post some pics cause every time I do a mod I never post pics.., THANKS XIPHER FOR FIXING MY PICS. sorry for my dirty car it needs a wash..













DC HEADER


FINALLY THE FINISHED PRODUCT TUCKING TOP OF TIRE ON ALL 4 CORNERS!!!


SOME FUN PICTURES OF WHAT A MANS GARAGE SHOULD LOOK LIKE..lol..

BUILT 289 in front, and punched out, cammed 460CI with tunnelram and 2x4bbl 750's in back..


every mans garage need one of these

Edited by etmydst, 19 March 2007 - 05:29 PM.


#2
bobdragster

  • Without 無限Limit
  • PipPipPipPip
    • Group: Contributing Member
    • Location:Austin, TX
    • Drives: 1980 Honda Prelude
    Garage View Garage
The car bra takes so much away from the car....


EDIT: Who cares... I could never have a car that nice, it's a nice car, good job.

Edited by bobdragster, 19 March 2007 - 05:50 PM.


#3
RARECRX

  • Officially retired.
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Nor Cal
    • Drives: 1987 crx si,1985 CRX si, 2009 RS6,pimp'd out corolla,
    • Image Gallery
    Garage View Garage
I have a small crack in my header panel like 1.5" and it bothers me real bad... so I would rather look at the bra than the crack lol . personally I like no BRA ,but its not all that bad with it on.... so as soon as I get a one piece CF ZC hood It's history..

Edited by etmydst, 19 March 2007 - 06:05 PM.


#4
phatboycrxhf

  • legend in the making
  • PipPipPipPipPip
    • Group: Members
    • Location:lundar ,Manitoba Canada
    • Drives: 1985 crx ,98 malibu ,90 hatch,87 hatch trailer,87 legend,95 dodge neon,90 civic sedan SE
    • Image Gallery
wow thats a purdy car ohmy.gif good job wink.gif so how does it handle now ??? must be way better with those eibachs out of there huh how much did those brake lines cost you ??? are they still avalible

keep up the good work man

peace mitch wink.gif

My Webpage
(quote by RareCrx)HAVE A MADD TYTE DIGGITY DOGG ,BUBBLES SPRAYIN ON THE INTERCOOLER, poopin ON A 8 SECOND CHEVELLE WITH MY MINI-ME SWAP DAY..

#5
Sgt. Pepper

Awesome! I hope it rides as good as it looks. Nice job.
Adding power makes you faster in the straights. Subtracting weight makes you faster everywhere. - Colin Chapman

#6
RARECRX

  • Officially retired.
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Nor Cal
    • Drives: 1987 crx si,1985 CRX si, 2009 RS6,pimp'd out corolla,
    • Image Gallery
    Garage View Garage
^^^Thanks guys, HANDLES wayyy better with the coil-overs/sway bars/torsion bars, that header made a VAST improvement on the butt dyno... and the brakes ,WOW talk about improvement in stopping power over stock..Just incredible.......

But it rides like a FORKLIFT (for those that have driven one) LOL... its not unbearable but you can feel every bump and the hatch squeaks alot more lol..

I'll be putting mudflaps on her this weekend coming ,and probably aluminum drums with some Porterfield shoes But for the BLING factor my brother will POLISH out the aluminum drums......

I bought the brake lines for $50 brand new from "tire rack" lol, I guess when they found out about the price and they changed them back to $110 immediately. I think only a few people got them from RPR at $50....

Edited by etmydst, 19 March 2007 - 10:49 PM.


#7
rollz87civic

  • VOOM VOOM NO VTEC!!!!!!!!!
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:SPRINGFELD,OREGON
    • Drives: 1987 civic sedan(sold) 1987 civic DX(sold) 1992 civic SI(sold) 1985 civic wagon 4wd(sold) 1986 civic std DD(Sold)1986 civic dx(sold)
    • Image Gallery
very clean!!!!!!!!!!!!!!!!!
SACHR member be hate for who you are not loved for who your not.

Posted Image
Member in the Carburetion Nation





RIP GLEN

#8
C8V6C

Looks like it is coming together nicely! Cant wait to see it finished w/o the bra tongue.gif

844b096b-9fda-4214-b621-217bc4a6dce1.jpg


#9
rollz87civic

  • VOOM VOOM NO VTEC!!!!!!!!!
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:SPRINGFELD,OREGON
    • Drives: 1987 civic sedan(sold) 1987 civic DX(sold) 1992 civic SI(sold) 1985 civic wagon 4wd(sold) 1986 civic std DD(Sold)1986 civic dx(sold)
    • Image Gallery
how much was the header?
SACHR member be hate for who you are not loved for who your not.

Posted Image
Member in the Carburetion Nation





RIP GLEN

#10
RARECRX

  • Officially retired.
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Nor Cal
    • Drives: 1987 crx si,1985 CRX si, 2009 RS6,pimp'd out corolla,
    • Image Gallery
    Garage View Garage
I bought the header new in box $200 they retail $389, from a speed shop owner, and 1st gen crx autox champion.. I also bought a CRAPLOAD of brand new lightspeed stuff(rotors,swaybars I still have front/rear ones new in box,, and JR torsion bars from him all new in box, mugen internal sway bar also) my G/C coilovers new in box... I'll give his name out as soon as I clean him of all his 1st gen parts lol.. He may have even been a member here, only things he has left are a original turbo-rex turbo kit (used) dc short shifters,some more x-drilled rotors,mugen camshaft (used) he wants $350 for..and some other odds and ends my wife won't let me afford right now....

Edited by etmydst, 20 March 2007 - 01:25 AM.


#11
Aren D.

  • Save the pepper, save the world.
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Tooele UT
    • Drives: 1985 CRX SI/2003 Frontier SC/2006 Jetta TDI/2014 Civic SI
    • Image Gallery
    Garage View Garage
nice and clean! bring back some love for first geners every where!!!

#12
Super_Cricket

  • Daddy are you gonna Kill Mommy? Thats up to Mommy aint it?
  • PipPipPip
    • Group: Contributing Member
    • Location:Washington DC
    • Drives: Civic SI 1986, Crx SI 1985, 1993 Integra LS
    • Image Gallery
Hey give me his number. I could steal those left over parts from him in the blink of an eye. Amazing looking car. you cant tell its a 21 year old. Its already at drinking age damn... But it looks great. without the bra. Bras are for girls.... 38 dds. please.

Edited by CRX88SIR_CIVIC86SI, 20 March 2007 - 09:28 AM.


#13
RARECRX

  • Officially retired.
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Nor Cal
    • Drives: 1987 crx si,1985 CRX si, 2009 RS6,pimp'd out corolla,
    • Image Gallery
    Garage View Garage
Does the bra really look that bad? I cant notice the difference i guess, maybe cause its my car..lol.. If it looks that bad I'll remove it hahaha..

#14
a3h87

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:TWO FAST 4 YALL
    • Drives: i'm gonna need these keys to 87 honda
looks good.clean...ride.
Powered By Honda

#15
paulk

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Leicester, UK
    • Drives: 1990 CRX VT, 1986 CRX
Looks fantastic.

Where'd you get the bra and the sunroof diffuser from?