Seeing as how im getting a house with a garage within the next week, the CRX will be getting MUCH more attention. As of now the car has an unknown starting problem and has been sitting immobile in our apartment parking lot for over two months, i figure the engine needs a rebuild anyway. I will also be upgrading the brakes and suspension. The body is also going to be completely redone and i may throw in another goodie that ill keep under wraps for now .
I also need to fix/replace my jacked up half-ass ricer mods.
Some newer pics:
Look for picture intensive updates in the coming weeks (and yes aren d's build did a good bit to inspire me).
I'd like to have it done in time for next years big CRX meet (wherever that may be).
enjoy,
Jacques
3
The Not So Super Build
Started by JDN14, May 24 2005 09:14 PM
68 replies to this topic
#1
Posted 24 May 2005 - 09:14 PM
#2
Posted 25 May 2005 - 12:02 AM
#3
Posted 25 May 2005 - 01:12 AM
Sweet! I have those same wheels but they are in 4x113 for an accord... Any way sounds awsome! whats up with the not so super build it sounds pretty super to me... Good luck with it and have fun, also good luck with your house
#4
Posted 25 May 2005 - 07:06 AM
QUOTE (Aren D. @ May 25 2005, 01:12 AM)
whats up with the not so super build it sounds pretty super to me...
Well, it'll go slower than yours and some parts may actually stay on the car......and "the super build" was already taken .
enjoy,
Jacques
93 Toyota Previa: Mid Engine, AWD people mover.
#5
Posted 25 May 2005 - 07:42 AM
QUOTE (JDN169 @ May 25 2005, 07:06 AM)
QUOTE (Aren D. @ May 25 2005, 01:12 AM)
whats up with the not so super build it sounds pretty super to me...
Well, it'll go slower than yours and some parts may actually stay on the car......and "the super build" was already taken .
enjoy,
Jacques
how about the sorta supa build? Or the alright build or the kinda good build, or built well, Its more ketchy than mine project: whatever I can get my hands on cause I can't seem to wait till I got it together build. (doesn't exactly roll of the tongue). But you could call it fart in a jar build (imagine the hits you'ld have then.
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#6
Posted 25 May 2005 - 07:54 AM
QUOTE
how about the sorta supa build? Or the alright build or the kinda good build, or built well, Its more ketchy than mine project: whatever I can get my hands on cause I can't seem to wait till I got it together build. (doesn't exactly roll of the tongue). But you could call it fart in a jar build (imagine the hits you'ld have then.
Look better?
93 Toyota Previa: Mid Engine, AWD people mover.
#7
Posted 25 May 2005 - 08:03 AM
Ok fine I'll call mine Project: Fart in a Jar
All the hits will be mine. MUwahahahahaha.
All the hits will be mine. MUwahahahahaha.
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#8
Posted 25 May 2005 - 03:29 PM
QUOTE (21373669 @ May 25 2005, 08:03 AM)
Ok fine I'll call mine Project: Fart in a Jar
All the hits will be mine. MUwahahahahaha.
All the hits will be mine. MUwahahahahaha.
Man, Got beat out again. Project: Fart in a Jar.
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#9
Posted 25 May 2005 - 04:57 PM
QUOTE (21373669 @ May 25 2005, 03:29 PM)
QUOTE (21373669 @ May 25 2005, 08:03 AM)
Ok fine I'll call mine Project: Fart in a Jar
All the hits will be mine. MUwahahahahaha.
All the hits will be mine. MUwahahahahaha.
Man, Got beat out again. Project: Fart in a Jar.
dude, that thing has a F20 . probably dont even weigh 1600 pounds either. i want it.
When I die, i want to go asleep peaceful.......... not screaming and freaking out like everyone else in the car
"i left the bar a little after you and ended up flipping my car in the arbys drive thru"
IM A LOSER!!! my car pulls harder when spinning than any "highly modified" EW
Team BUrnOUt founding member
"i left the bar a little after you and ended up flipping my car in the arbys drive thru"
QUOTE (cbstdscott @ Dec 10 2008, 03:27 PM) <{POST_SNAPBACK}>
Another loser who can not get traction. I feel sorry for him.
IM A LOSER!!! my car pulls harder when spinning than any "highly modified" EW
Team BUrnOUt founding member
#10
Posted 25 May 2005 - 07:28 PM
starting problems are easy to start if its the strarter thats not turning.. just do a good old bum-start
but that thing does look sexy in flat black
but that thing does look sexy in flat black
EXPLOSIVO!
84 Civic Hatchback 1500S-w/ d16 blacktop
86 Nissan 300zx GLL
SportInjectedClub
84 Civic Hatchback 1500S-w/ d16 blacktop
86 Nissan 300zx GLL
SportInjectedClub
#11
Posted 25 May 2005 - 09:07 PM
QUOTE (bigk3000 @ May 25 2005, 07:28 PM)
starting problems are easy to start if its the strarter thats not turning.. just do a good old bum-start
but that thing does look sexy in flat black
but that thing does look sexy in flat black
it's not the starter, i'm 99% sure it's a timing issue (and i did try push starting it ). But it's been using more oil lately and ive been aching for an excuse to tear into the motor.
93 Toyota Previa: Mid Engine, AWD people mover.
#12
Posted 25 May 2005 - 09:37 PM
oh right.. its a common problem.. what you do is just throw a b16a1 in there.. should clear things up
EXPLOSIVO!
84 Civic Hatchback 1500S-w/ d16 blacktop
86 Nissan 300zx GLL
SportInjectedClub
84 Civic Hatchback 1500S-w/ d16 blacktop
86 Nissan 300zx GLL
SportInjectedClub
#13
Posted 26 May 2005 - 03:27 AM
What happened to the really cool post title?
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#14
Posted 28 May 2005 - 07:12 PM
Does anyone know if 1g Integra front disks will fit under a 13" wheel?
thanks!
Jacques
thanks!
Jacques
93 Toyota Previa: Mid Engine, AWD people mover.
#15
Posted 28 May 2005 - 07:21 PM
yes they will... i have them on my car and stock 13 steelies on the front at the moment
EXPLOSIVO!
84 Civic Hatchback 1500S-w/ d16 blacktop
86 Nissan 300zx GLL
SportInjectedClub
84 Civic Hatchback 1500S-w/ d16 blacktop
86 Nissan 300zx GLL
SportInjectedClub