B16 Prep Done :d
#1
Posted 03 May 2005 - 06:21 PM
today i sandblasted the intake and all the valves and sensors on the intake inlcuding the throttle body and fuel rail. and i thought i could post some pictures of my Swapping saga over here.
I used an sand blasting air tool i a home made sandblasting cabinet with sand make of crushed sea shelves. and before i began with blasing i de greased it all with oven cleaner..
The intake is from a B16a1 engine wich i going to replace my current ZC1-AS53 engine .
Greetings Erwin.
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#2
Posted 03 May 2005 - 06:23 PM
#3
Posted 03 May 2005 - 07:50 PM
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#4
Posted 03 May 2005 - 07:53 PM
#5
Posted 03 May 2005 - 08:22 PM
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#6
Posted 06 May 2005 - 07:16 PM
#7
Posted 06 May 2005 - 07:41 PM
#8
Posted 06 May 2005 - 07:52 PM
#9
Posted 06 May 2005 - 08:06 PM
some new pictures of today :
those cylinders look good
Now im going to put it all into the dish washer to get it nicely grease free and clean
Greetigns Erwin
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#10
Posted 09 May 2005 - 01:31 AM
#11
Posted 09 May 2005 - 03:24 AM
i dont know the english wordt for it only the dutch.
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#12
Posted 09 May 2005 - 03:24 AM
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#13
Posted 09 May 2005 - 05:17 PM
Victor
86 K24 Powered CRX SI (HPDE-4 NASA & TA-AB Time Attack)
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
#14
Posted 11 May 2005 - 03:30 AM
BTW i test fitted the B18 header for my girl friend she has an Delsol Vtec and wants the B18 Intake and exhaust header on it because of some good dyno results we have seen with that setup on a B16 engine.
Greetings
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#15
Posted 16 May 2005 - 05:15 PM
What do you guys think of it ?
Groet Erwin
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive