Hey Tom I know i missed the last GB but i was wondering if you guys are going to sell it again?? im interested and want one for my teg. If you could let me know when is the next GB i would love it. Thanks j
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/icon_users.png)
![](http://www.gravatar.com/avatar/992d21f29a13effe403d394a8c90acb3?s=100&d=https%3A%2F%2Fwww.redpepperracing.com%2Fforums%2Fpublic%2Fstyle_images%2Fsolid_red323%2Fprofile%2Fdefault_large.png)
Wtb: Rpr Adj Pan Hard Bar?
Started by kuni00, Oct 14 2004 08:51 PM
144 replies to this topic
#1
Posted 14 October 2004 - 08:51 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
#2
Posted 15 October 2004 - 09:45 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
I hadn't really thought about it, but I can start one now, if there is enough interest. 5+ orders would be the minimum I'd need to make it worthwhile. So, we are at 1 now... ![smile.gif](https://www.redpepperracing.com/forums/style_emoticons/default/smile.gif)
Might want to post in the main sectioon somewhere as well, reference this thread.
![smile.gif](https://www.redpepperracing.com/forums/style_emoticons/default/smile.gif)
Might want to post in the main sectioon somewhere as well, reference this thread.
"Toby, you are a thief of joy"
#3
Posted 15 October 2004 - 10:29 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
#4
Posted 15 October 2004 - 11:33 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
me too ,but i will not have the money to late november RPR . I do want one cause i will need one by next feb
#5
Posted 15 October 2004 - 12:56 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
The bars are $130 US shipped anywhere in North America, are 100% stainless steel, with Aurora rod ends. It bolts up to the stock locations, and is adjustable without removing from the car.
"Toby, you are a thief of joy"
#6
Posted 15 October 2004 - 02:33 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
QUOTE (rpr @ Oct 15 2004, 11:56 AM)
The bars are $130 US shipped anywhere in North America, are 100% stainless steel, with Aurora rod ends. It bolts up to the stock locations, and is adjustable without removing from the car.
I've seen one up close - nice piece Tom!
Kirk
#7
Posted 15 October 2004 - 05:24 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
how do we change the bars? is it just bolts? someone told me you have to cut the old one out.
#8
Posted 15 October 2004 - 06:32 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
One bolt, one nut. The problem could arise where the bolt is seized though. Normally, it's very easy.
"Toby, you are a thief of joy"
#9
Posted 16 October 2004 - 04:24 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
sounds good tom.. i will have the cash ready on the 25th.. i know its a great piece since i got the shift knob already.. that was cherry as well man.. but yeah im definatly in for one. also whats the scoops on the camber plates??? thanks tom.. later.. j
#10
Posted 16 October 2004 - 04:28 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
do they fit JDM / EDM 1st gen ?
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#11
Posted 16 October 2004 - 11:44 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
#12
Posted 16 October 2004 - 07:26 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
QUOTE (toxicshit @ Oct 16 2004, 04:28 AM)
do they fit JDM / EDM 1st gen ?
Yes, it should. Overseas shipping would be more, likely double. To Great Britain or the Netherlands it's about $35US.
"Toby, you are a thief of joy"
#13
Posted 17 October 2004 - 03:38 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
QUOTE (rpr @ Oct 16 2004, 07:26 PM)
QUOTE (toxicshit @ Oct 16 2004, 04:28 AM)
do they fit JDM / EDM 1st gen ?
Yes, it should. Overseas shipping would be more, likely double. To Great Britain or the Netherlands it's about $35US.
then i would like a bar but at this time i dont have the money just bought me some carbon side garnish from 5051
![wink.gif](https://www.redpepperracing.com/forums/style_emoticons/default/wink.gif)
but lets say next month i would like one.. so ill pm you when i have the money ready for you.
Greetz Erwin.
1. EDM 1986 Honda CRX AS - B16A1 engine - OBD1 - Turbo - Stitch welded chassis.
2. EDM 2001 Lexus IS300 3.0 RWD - Daily Drive
#14
Posted 17 October 2004 - 04:27 AM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
QUOTE (rpr @ Oct 16 2004, 07:26 PM)
QUOTE (toxicshit @ Oct 16 2004, 04:28 AM)
do they fit JDM / EDM 1st gen ?
Yes, it should. Overseas shipping would be more, likely double. To Great Britain or the Netherlands it's about $35US.
thats ok tom i have the money when you want it mate, when do you want the money and how long do they take to make
#15
Posted 17 October 2004 - 07:32 PM
![](https://www.redpepperracing.com/forums/public/style_images/solid_red323/post_offline.png)
Well, we like to have at least a few definite orders before we start making them. As for how long, it depends on how busy opur machinist is...usually a couple of weeks.
If anyone wants to reserve one, send me a $40 US deposit to [email protected] via paypal and you will get one.
Thanks
Tom
If anyone wants to reserve one, send me a $40 US deposit to [email protected] via paypal and you will get one.
Thanks
Tom
"Toby, you are a thief of joy"