Header Identification
#1
Posted 19 February 2009 - 11:13 AM
Mugen Header:
Coating: Ceramic
Runners: 1 1/4" Wider
1 5/8" Tall
Collector: 2"
DC Sports:
Part #: HHC5001
Coating: Ceramic
Runners: 1 1/4" Wide
1 3/4" Tall
Collector: 1 7/8"
*NOTE: on both DC Sports headers i've owned the O2 bung has been on the runner. Later DC Sports headers had the bung located by the collector*
Kansai Header:
Coating: No Coating if i remember correctly
Runners: 1 1/4" Wide
1 3/4" Tall
Collector: 1 3/4"
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#2
Posted 19 February 2009 - 11:20 AM
Part #: HO3006
Runners: Unknown
Collector: Unknown
*Note: Early LSR units seem to not have a carb eq badge however later headers did have a plate on the third runner*
*Not my pictures or my header i've yet to find a LSR unit but would love too so sell me one. If you have measurements pm thanx*
Chikara/Hedman Header:
Part #:37010
Coating: None Painted
Runners: 1 1/4" Wide
1 5/8" Tall
Collector: 2"
OPM:
Runners: 1 1/4" Wide
1 5/8" Tall
Collector: 2 1/4"
*Note The OPM header has no badge or o2 bung*
Pacesetter 4 -1
Runners: Pending
Collector: Pending
Misc info- hangs very low does have a brand plate on runner #4. i'll try and get a good picture but it's pretty rusty i'll try and clean it up.
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#3
Posted 19 February 2009 - 11:30 AM
Runners: *pending*
*pending*
Collector: *pending*
I need info on the Jackson Racing header and the LSR one. Pics of the Chikara/Hedman. And pics and info of any other header i'm not aware of.
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#4
Posted 19 February 2009 - 12:51 PM
#5
Posted 19 February 2009 - 01:00 PM
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#6
Posted 19 February 2009 - 01:04 PM
It looks 100% like an LSR unit.. maybe an early unit BEFORE they got the CARBEQ and put the plate #
#7
Posted 19 February 2009 - 01:11 PM
#8
Posted 19 February 2009 - 01:33 PM
#9
Posted 19 February 2009 - 03:46 PM
opm = runners 1 1/4" wide
tall 1 5/8'' tall
collector 2 1/4''
4 into 1 design
no carb plate
no o2 sensor bung.....
#10
Posted 19 February 2009 - 10:43 PM
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#11
Posted 20 February 2009 - 10:14 AM
Doug
#12
Posted 20 February 2009 - 04:05 PM
yeah i'll see what i can come up with..... sometime this weekend...
#13
Posted 22 February 2009 - 02:14 AM
#14
Posted 23 February 2009 - 08:35 PM
(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Success is about standing out, not fitting in.
#15
Posted 23 February 2009 - 08:42 PM
sure man...