b16cRex's Content

#352013 Wiring For A B16a Obd O In An Si.

Posted by b16cRex on 04 September 2007 - 08:59 AM in Swaps

wow that sucks, i know i paid a little over 100 for it. no more than 120.

QUOTE (E-AT_me @ Sep 2 2007, 08:05 PM) <{POST_SNAPBACK}>

i have the normal b16a i believe a PR3.

screech: no way could i get it running in time for the 22...
or could i?

btw, rywire is 225. and i don't think i'm gonna pay that.

#351822 Wiring For A B16a Obd O In An Si.

Posted by b16cRex on 02 September 2007 - 09:06 AM in Swaps

i sent my harness off to rywire.com and they hooked it up for me for around 100$ i think

#343756 Cf Hoods, 84-87 Crx Only

Posted by b16cRex on 03 July 2007 - 09:11 PM in General Posts

1 peice zc sounds great, what do i do to place an order?

#343579 Cf Hoods, 84-87 Crx Only

Posted by b16cRex on 02 July 2007 - 07:38 PM in General Posts

I definatly will buy one, just let me know when and where to paypal. I think you might have my email about my info, for the last design

#342599 Group Buys Section

Posted by b16cRex on 24 June 2007 - 10:35 PM in General Posts

Sounds like a great idea to me.

#341363 Happy Father's Day

Posted by b16cRex on 16 June 2007 - 11:44 PM in Off-Topic

Happy fathers day everyone. Give your Kids a ride in those 1g's of yours. I know I will when I'm bac from iraq!

#341347 Car Died! Ahhh!

Posted by b16cRex on 16 June 2007 - 10:12 PM in General Posts

your fuel pump could of took a crap, saw that same type of thing on my buddies EF.

#341052 Need Some Parts

Posted by b16cRex on 14 June 2007 - 02:14 PM in WTB

I'm still looing for the turn signals on the bumper, Let me know thx.

#339934 Need Some Parts

Posted by b16cRex on 06 June 2007 - 08:00 PM in WTB

I have a 86 crx si, I need a passenger side taillight. Both front turn signals. Windsheild wiper arms.

Thx for the Help in advance.

#337970 1g Gen Crx Cf And Fg Hoods

Posted by b16cRex on 26 May 2007 - 11:38 PM in General Posts

any updates? looking forward to a cf hood

#332016 1g Gen Crx Cf And Fg Hoods

Posted by b16cRex on 13 April 2007 - 08:03 PM in General Posts

Bump for info

#330481 My 11.8@118mph Video :p

Posted by b16cRex on 04 April 2007 - 06:16 AM in General Posts

Very very nice times man.... Im jealous

#314697 Turbo Questions

Posted by b16cRex on 24 December 2006 - 08:30 PM in Turbo/Forced Induction

On a b16a1 (obd0) I didnt run a fuel pump or injectors, on 6 lbs. It was tuned with a fmu and neo vafc. Worked fine. if your only boosting 7 lbs, i dont think you need an upgrade other than a fmu and a vafc..... On 9 lbs i did upgrade to the walbro 255 and some 390 injectors, but this is more getting myself ready for the 350whp build im about to do on my 1g. I might need bigger injectors but well see, im tuned down right now about 35-40% and im pushing 260whp

#300314 Traction

Posted by b16cRex on 14 October 2006 - 11:44 AM in Competition

Last night went back out to the track after new fuel pump, a walbro 255. dsm 390 injectors and tuning on the new apexI neo. i took 5 runs down the track. every run was faster than the last. starting out at a 14.7 all the way down to a 14.23, best time of the night. all this was done on street tires spinning through 1st and 2nd still. i found out im going to iraq in 2 weeks so ill pick up some slicks and suspension when i get back. i was traping a around 105-110 and didnt use my intercooler nitrous. i was happpy over all for the night, other than my nose piece cracked and flew over the car on the 3rd run.

#297598 86 Crx Si Part Out Nc

Posted by b16cRex on 02 October 2006 - 08:06 PM in FS

sounds good can i pay for the stuff with paypal?

#297465 86 Crx Si Part Out Nc

Posted by b16cRex on 02 October 2006 - 12:08 PM in FS

intrested in taillights to 79906 and what about the piece between the taillights, do you have that

#297427 Cf Hoods For The 3g Hatchie.....

Posted by b16cRex on 02 October 2006 - 09:07 AM in General Posts

very intrested also

#295702 Traction

Posted by b16cRex on 25 September 2006 - 08:13 PM in Competition

i went to put in my injectors but they were too big to fit in my b16a1 obd1..... now im stuck and not really sure what to do. anyone have any ideas that might help me out. im thinking of the 92-96 h22 injectors they are 345cc but would they fit in my motor?

#294702 Best Radiator For A 1g Crx?

Posted by b16cRex on 22 September 2006 - 03:05 PM in 1G CRX

on my turbo setup i use the 92-95 civic radiator and it keeps the engine cool enough for my needs. i had to fab a bracket to put it in but if you have an imigination its not hard.

#294222 Hoosier A6 Results

Posted by b16cRex on 21 September 2006 - 01:23 AM in Competition

congradulations!!

#293595 Traction

Posted by b16cRex on 19 September 2006 - 05:57 PM in Competition

i got my 410 injectors in today and my walbro 255 is in the mail on the way here and i got my neo in the mail yesterday so i should be getting the lsd will be installed on sunday!! and do some tuning on it next friday before i hit the track friday night

#293045 Traction

Posted by b16cRex on 18 September 2006 - 07:04 AM in Competition

well my up date is i took it out a few times but im waiting to run it hard till i get bigger injectors some 450's off a DSM. a walbro 255 ( prolly going to mod a intank setup to make it work) and some tuning. should be another week till i can get that done and hit the track. slicks should be here by the end of the month. and a ys1 lsd so we should be in the 13's i hope. if anyone else has suggestions it would be great. i hear so many people talking how they ran 14's all motor with the b16a1 in a 1g but i only hit a 15.6 at 3600 ft on street tires. now im hitting 14.4 best on 8 lbs of boost and street tires.

#289828 Dyno Day Number One

Posted by b16cRex on 07 September 2006 - 07:33 AM in Competition

nice numbers bro!! i cant wait till i tune mine

what program do you use to tune?

#289825 Traction

Posted by b16cRex on 07 September 2006 - 07:30 AM in Competition

i will i should be going to the track tomorrow night so if i can figure out how to put video on here i will

#289656 Traction

Posted by b16cRex on 06 September 2006 - 06:16 PM in Competition

Wow what a great post!!! thx that helps out a lot.. thx a ton