From what Honda products can I source sway bars and torsion bars?

From RPRWiki

Both the Si CRX and DX CRX had the same suspension

Specs:

Stock 84-87 SI & DX: Front sway bar 16mm Rear internal sway bar 15mm Torsion bar 20mm @24.5\" Long

Civic Wagon 2WD: Front sway bar 20mm Rear internal sway bar 15.5mm (won`t fit into CRX beam axle due to end link) Torsion bar 21mm @ 22.5\"Long (shorter then CRX bar, need wagon torque tubes) Thicker rear springs (cut to fit)

Civic Wagon 4WD: Torsion Bars 21mm @ 24.75\" Long (will work with CRX Torque tubes.)

Integra: Front sway bar 19mm Rear sway bar 17mm Torsion bar 22mm they are longer then CRX bars and won`t fit in lower arms Thicker rear springs Integra SE Rear internal sway bar 19mm