Cooling fan rewiring

From RPRWiki

To all whom are having the problem of the irratic cooling fan operation. Test your core sensor, if it's good then take 12v off the batt with a 20A fuse inline to the core sensor. cut the factory wires and bunt one with the 12v power, then cut your fan wires and bunt the other core lead to the determined hot lead to the fan. next rout a ground wire and bunt it to the negitive (black or determined) fan lead. lastly make your connections at the battery and test. It worked like a charm for me, fan cycle seems more perdictable than my crx wired correctly. Good luck!