12 replies to this topic

[rexsk8er]

Anyways, I have quite a few projects. Really Theres only one car im not workin on at all times lol. Scroll Down for the meat of the 3g stuff, just thought id post some new pics....

My '02 RSX Type S, Got some JDM style badges, some of the previous owners got carried away and didnt take much care of the car, but thats why i got it for the cheap....








Anyways its gonna get a lsd stg3 clutch 2.4 block and 100shot one day.....


but i have a few other projects to get goin first... My 89 Acura integra, needs a motor.... id sell it cheap lol...




i got a 86 volkswagen jetta perelli edition for $CHEAP all that was wrong was a busted injector line. Its got nice coilovers and sits tuckin rubber. rides nice and has a decient headunit/sterio. anyways, possibly vr6 swap candidate.

[rexsk8er]

and now, my main project. Its been torn down a few times, but this time tis gettin the most work. First couple times i put new tranny and lsd, redid the suspension to make it ride properly @ lowrider stance. Basically just a ls swap with a pr4 harness and computer. Its baisically stock but im putting a custom t3/to4e 50 trim turbo, 38mm tial w/g soft chargepipe with dsm bov, small FMIC, 450cc dsm injectors and either my pm6 chipped or ill chip the pr4 computer in the car. hopein for 12s.... should get some water injection and possibly will run on e85......

[Gant]

sweet build man, those p-slots would look real nice on your hatch

[rexsk8er]

Yeah, its for sure gonna get the p-slots on there at one point or another. ill put up pics lol



anyways, i finished the exhaust manifold, so now to the machine shop to resurface the flange (welding warped it) the other two flanges seal fine, because the exhaust flange warped differently (welded the exhaust ports on the inside and out)









I dont think i used a tape measurer once lol everything just falls into place and is eyeballed and seems to be going together great so far, ill have pics of the manifol going up soon.


anyways stopped up town saw some friends cars.... i got the turbo im useing free, for helpin this dude swap a rb20det into his 240.... also saw my buddies built dsm, pretty easy 11 sec car

Edited by rexsk8er, 11 July 2010 - 10:00 PM.

[badpenny]

Polish those p-slots. Oooo or woodgrain.

[rexsk8er]

well heres some more progress, got the FMIC on there, and finished up the charge pipe



450cc injectors installed along with the pm6 computer. got the manifold on a belt sander so i think that will work and if not ill have to take it to the machine shop, just dont have money for that


i got the oil drain welded in place, kinda PITA drillin the hole w/o gettin a buncha crap in the oil pan, but i dont think ill have to take it off. there werent any shavings in the oil i drained, and im going to flush the motor with desiel and than more oil before its run.




finaly installed the turbo/wg/mani/downpipe. i still have to fab up the w/g dump and the connection to the rest of the exhaust.




gotta hook up the oil drain line, flush the motor and fill it with oil, let it idle out the 1/4 tank of 87 lol, and soon to be on a strict 91/93 diet...

im finding it a little hard to find a map setup for the ls with 450s on a pm6 computer with turboedit. my pr4 is the older modle that you cant chip, afik



anyways thanks for looking!!! RIPPER VIDS SOON!!!!!!!!!!!

Edited by rexsk8er, 16 July 2010 - 10:46 PM.

[VaporParanoia]

ooooo, sexy

[zakats]

im finding it a little hard to find a map setup for the ls with 450s on a pm6 computer with turboedit. my pr4 is the older modle that you cant chip, afik

coughobd1ahem... I had some popcorn stuck in my throat

[rexsk8er]

ITS ALIVE!!!

UPDATE:

Just burned out the 87, now its full of 93

installed lc1 and xd16 gauge for the o2 sensing

installed boost controller and upped it to 8 psi, this thing f'n rips!!!

swapped out for the p-slots to get the longer gear, for more fun in boost!!!!

no pics just yet, ill post some up soon with ripper vids, gotta get it tuned now, and install front bumper and header panel.

[rexsk8er]

all finished. about to upgrade to 2.5 bar map and than tune away!!!

Edited by rexsk8er, 24 July 2010 - 01:36 PM.

[rexsk8er]

[Old School REX]

Looks like a really fun car man!

[rexsk8er]

CLICK HERE FOR RIPPER/TEST VID



Sorry for the shakey hand, i gotta get someone in the car with me next time, so i can open it up.