20 replies to this topic

[evilGearhead]

I need all sorts of things to complete my project:

SI tank, soft lines and pump bracket.
nice crx brake booster
right quarter glass
nice quarter glass trim both sides
nice window sill trim both sides
integra door lock poppers

Please send me prices and shipping cost

thanks!

[evilGearhead]

cmon folks, i need this stuff!

[OG Wagon]

I've got your glass and trim for the quarter windows. I just don't know how to get it off my parts car. PM me instructions and I'll give it my best try!

[kaymo]

i thought about you OG when i read this. you still want to chop that thing up? we could slice the window and trim out leaving the metal so we dont mess it up trying to remove it

[strudel]

I've got most of the stuff you need but shipping will be a bit more from Canada than the US plus possible customs duty. I have an Si tank. Rear quarter glass removed from car but no trim. I have a CRX booster. Window sill trim in good shape is near to impossible to find. I may have one but don't know how good it is. You do mean the part that sits on the door and has the rubber that the window rubs against? It would be a fairly large box with the tank and glass so it doesn't break. let me know if you are interested. Send me an email (in my profile section) and I can take pictures of what I have and send them to you first. What's this stuff worth to you? JS

[icebox187]

piano wire

[kaymo]

he doesnt need tank, just pickup and lines. already asked him about that

[beechstreet]

I've got your glass and trim for the quarter windows. I just don't know how to get it off my parts car. PM me instructions and I'll give it my best try!

I'm in the same situation. Wanna remove all the glass from my parts car but sorta unsure how

[strudel]

I'm in the same situation. Wanna remove all the glass from my parts car but sorta unsure how

This is a WTB thread but here goes anyway. It's a lot of hard work to remove the rear quarters. I tried the piano wire bit and gave up as it was a grind. I cut out as much of the black stuff with an Olfa knife razor blade. Kind of like a V groove. Then I carefully used a head gun to soften the material up and then slowly pried it off with a metal spatula starting from the back end. Just be careful you don't pry too hard and crack the glass.

I would try the heat gun method with the trim as well but here you have to be very cognizant not to over heat the strip or you will melt it as well as the goop holding it. They tend to be a bit brittle but the heat softens everything up enough to slowly pull it out of it's resting place. That's all I can advise on this issue. JS

[strudel]

Do you still need a booster as I have a couple? JS

[Aren D.]

I get back home next week, send me a pm like next sunday if you still need anything, I have alot of parts. ALOT

[GoAt]

i got the glass out and a really nice brake booser of u are interested pm me

[evilGearhead]

Thanks to the folks who have stepped up to get me some parts,

My list has been updated:

I need
nice quarter glass trim
upper radiator mounts
integra door lock poppers
wiper linkage from motor to pass side arm
firewall grommets for both the heater core and AC
complete third brake light


thanks!

[duner]

Thanks to the folks who have stepped up to get me some parts,

My list has been updated:

I need
nice quarter glass trim
upper radiator mounts
integra door lock poppers
wiper linkage from motor to pass side arm
firewall grommets for both the heater core and AC
complete third brake light


thanks!

What rad mounts are you refering to? pic?

I have:

a full wiper linkage
3rd brake light

tim

[evilGearhead]

the mounts are the ones taht slide into the brackets on the top tank of the 1g radiator.