4 replies to this topic

[d15a2?]

hey whats up guys, im a noob at this and im considering on removing the heater and the a/c on my 87 crx(d15a2). i want to the know the vac lines to remove if any ... so i was wondering if any of you guys could help me out with this ....

[CarbRacer1987]

I'm not an expert by any means, but you have you tried looking at the sticker on the underside of the hood. It has one or two hoses and ports labeled ('except models without air conditioning' or something like that). Maybe the sticker under your hood is different than mine. If you can't find any of these references on your sticker, try searching the the 1st gen technical forum for "vacuum diagram" or something like that. I know someone's posted a blow-up of the under the hood diagram. I don't have AC in my DX, so..... As for the heater, I haven't the foggiest idea. I've never noticed any vacuum lines going to the heater in my car though.

Edited by CarbRacer1987, 14 February 2005 - 07:38 PM.

[Aren D.]

You want to take out your heater? Man you MUST be hare core.

[d15a2?]

You want to take out your heater? Man you MUST be hare core.

<{POST_SNAPBACK}>

im makin my crx an all race crx ... no need for the heater nor the a/c but ya i got the intake off and im still lookin what vac. lines i can plug and im not having any luck ....any type of info would be greatly appreciated. thanks

[Kain]

if you're going all-race i'm assuming you're removing the emissions vac tubes as well? i would hope so if you plan to work on it much! here's the pics showing the 3 or 4 holes you need to have hosed, and the others that should be plugged. I'm running this in my car and it runs very decently (i think it's head gasket could be going, and i know it's burning a lot of oil, so i'm sure that's contributing to the problems, i don't think it's the carb)

anyway, here are the pics in CRXfanatic's Album