Turbocivichatch

I drove it today but it's idling really hi and my motor is to low and the inner boot on the pasanger cv shaft is no longer one piece so I'm gona try to raise the motor and figure out what wiring harnes I should go with to get all of my gauges working correctly

I think the tack is blue what is it on the ob2?

I'm trying to use the 0b2 harness computer intirior harness I eliminated alot of the connections that did not go to anything

there only 1 o2 sensor on my d16y8 motor from a 2000 civic coupe I have the motor runing with a separate ingnition switch I need to no what my options are with getting my gauge cluster working my tack ,speedometer is a cable from the crx has anyone used a adapter? Like this one?http://www.ebay.com/...9038948?lpid=82and hooking up my transmission wiring ....I got lucky using the auto tranny it fit with no problems with the cv shafts worked perfect I have it mounted in and just need help figuring out the wiring. Does anyone have pinouts for a carbd 86 crx 1.5 base model?

Ok, my question may have been answered already and if so I apologize. I'm helping a good friend of mine put a d16y8 and auto trans, not sure why he kept it auto, into a 86 1.3 auto. My question is can anyone please help us Out with the wiring part of the swap. So far we are using the engine bay harness from the donor y8, not sure if that's the correct harness to use or not. Any help would be much appreciated.