12 replies to this topic

[crxboi]

OK i recieved a cab hat from phatboycrxhf and while im waiting for the cold air to reach my house i made this!!! The filter is KnN off a Rx7 FC and i attached it to the carb hat! I also recieved a air breather from my buddies at mps motorsport! So tell me what you think!

The pics arent the greatist cause they are from my camera phone!!!!








Thanks!
-Chris

[zakats]

nto bad, better than what I got....which is open to the elements for now :X

[crxboi]

nto bad, better than what I got....which is open to the elements for now :X

<{POST_SNAPBACK}>

ya i was racing my car on the track and i tolk off the whole intake setup and was running just the cab it mad a diffrence but not much!

[Richard]

ditch the ew. atleast go bikecarb'd or something. a d16 swap is so cheap!

[crxboi]

ditch the ew. atleast go bikecarb'd or something. a d16 swap is so cheap!

<{POST_SNAPBACK}>

how cheap is it!!!!

[Richard]

if i just straight swapped the integra into the civic, it would of been 300

just search for 1g teg, driving past keep an eye out for one sitting in someones driveway.

[crazi-85crx]

Keep the EW2. I would build it into a single cam screamer for less than a grand. Plus, no need to switch to fuel injection.

I can give you all the info you need if you want.

[crxboi]

Keep the EW2. I would build it into a single cam screamer for less than a grand. Plus, no need to switch to fuel injection.

I can give you all the info you need if you want.

<{POST_SNAPBACK}>

thats what im looking for i want to be able to race some one and woop ther ass and have them say wow thats carbourated!!!! so please post every thing i need to do to make it a carbed screamer!!! besides bike carbs unless you cone make a setup for me!
thanks
-Chris

[jjamiemmark]

get a cam!

[crazi-85crx]

Well, the only set of bike carbs I have left is for a future project, but you can find them hella cheap on ebay; like under $20. It really takes a lot of personal opinions to think of what you'd want to run, but here are some ideas to start with:

-Weber 32/34 downdraft carb, like 3gencivic is using.
-Stage 2 cam regrind.
-D16A1 pistons (0.04" overbore) <-- these would require about $400 in parts and labour at a machine shop, and even more if you want them to put it back together for you.
-MSD 6AL ignition box.
-ARP rod bolts.
-Si transmission.
-CenterForce or ACT clutch.
-Header and full 2" exhaust.
-Find a set of light-weight wheels (with a spare set of 2 with slicks on them for racing).

...There is just too much to list. You wanna keep it cheap but effective at the same time. So do things right, and make a thorough plan for what all you want.

[hoopty dx]

nto bad, better than what I got....which is open to the elements for now :X

<{POST_SNAPBACK}>

me too, its the only way to go

[zakats]

Dont you have the EW1? If you have perfect or close to perfect compression you could stick a SI or dx carb in there and convert to FI OR use bike carbs. you need to hit me up since im also in houston with a good, complete SI head and cam that i might consider trading...or I could just help you out with whatever
-zak

[crxboi]

Dont you have the EW1?  If you have perfect or close to perfect compression you could stick a SI or dx carb in there and convert to FI OR use bike carbs. you need to hit me up since im also in houston with a good, complete SI head and cam that i might consider trading...or I could just help you out with whatever
-zak

<{POST_SNAPBACK}>

mine is the dx and pm me with details!