Please help, I'm getting a code 8 on the ecu which is crank sensor. I'm going to check it tomorrow but the fsm does not give firing order. Unless the online version I have is missing it.
She wont start and has no spark.
I'm just starting to dig so please feel free to throw in any comments.
I'm going to ping out the wires and check for proper resistance tomorrow.
Thanks
0
Firing Order For B16... 1,3,4,2?
Started by shauno, Mar 01 2005 12:36 AM
6 replies to this topic
#1
Posted 01 March 2005 - 12:36 AM
#2
Posted 01 March 2005 - 12:59 AM
#3
Posted 01 March 2005 - 01:01 AM
My guess is the dizzy is bad? If you arent getting spark....try another b16 dizzy and see if that works...if your plugs were out of order, they will still spark
I have an obd 0 b16a dizzy for sale......i was using for a while, but im going obd1 now if you are interested
I have an obd 0 b16a dizzy for sale......i was using for a while, but im going obd1 now if you are interested
#4
Posted 06 March 2005 - 12:31 AM
you sure about the firing order? I thoght it was 1234 for some reason. but that is irrelivant, the car would still run if you mixed up the wires, it would just pop and sputter like a bitch
WTB- Turbo Parts: Turbo, Wastegate, FMIC, BOV
FS- Crx and Integra parts, lots of stuff just ask.
FS- Crx and Integra parts, lots of stuff just ask.
#5
Posted 06 March 2005 - 03:20 AM
QUOTE (C8V6C @ Feb 28 2005, 09:59 PM)
Correct! Bottom firewall side is Number one.
twitter: @lylehatton
#6
Posted 06 March 2005 - 03:22 AM
QUOTE (smashfascism @ Mar 6 2005, 12:31 AM)
you sure about the firing order? I thoght it was 1234 for some reason. but that is irrelivant, the car would still run if you mixed up the wires, it would just pop and sputter like a bitch
Nah, I think almost every honda is 1342