Has anyone else had a slight rise in their hood with only stock latch?
What can be causing the hood to rise? Weight or because the stock latch is a bit too up?..
0
Cf Hoodu
Started by Richardcoto452th, Jun 06 2014 05:55 AM
4 replies to this topic
#1
Posted 06 June 2014 - 05:55 AM
#2
Posted 06 June 2014 - 09:36 AM
#3
Posted 06 June 2014 - 09:50 AM
Was my hood suppose to come with bumpers?
It didn't have any holes on the bottom, and the hole for the arm that holds the hood up was filled with a foamy filler. I was unsure if it was supposed to be like this or if I have to drill my own holes.
It didn't have any holes on the bottom, and the hole for the arm that holds the hood up was filled with a foamy filler. I was unsure if it was supposed to be like this or if I have to drill my own holes.
#4
Posted 09 June 2014 - 11:24 PM
Adjusting the latch is simple. There are a couple 10mm nuts you loosen, and from there slide the latch assembly down. It's a trial and error to get it perfect.
Sent from my Z796C using Tapatalk
Sent from my Z796C using Tapatalk
Hoping to get back into the 1G game ASAP!
#5
Posted 15 June 2014 - 12:54 PM
I had to drill the holes to make the adjustment more lower so it was a bit more different for me.