Jump to content




Looking For Driver's Side Spindle

Started by niccer, Oct 06 2016 08:36 AM

  • You cannot reply to this topic
14 replies to this topic

#1
niccer
Posted 06 October 2016 - 08:36 AM

  • Slowpoke
  • PipPip
    • Group: 2014 Contributor
    • Location:Atlanta, Ga
    • Drives: '87 Civic Si, '11 F150 Ecoboost

Anyone have a spare driver's side spindle laying around they'd like to sell?  I need one in the next week, so any help would be appreciated. 


#2
CRXer87hf
Posted 06 October 2016 - 08:41 AM

  • Speedy
  • PipPipPipPip
    • Group: 2013 Contributor
    • Location:Atlanta, GA
    • Drives: 1987 Honda CRX HF, 1985 Honda CRX SI, 2003 Land Rover Disco
    Garage View Garage

Uh oh, what happened?  I may have on lying around you can just have.  I'll check when I get home today.


Build thread: "Skittle 2.0" - http://www.redpepper...l=&fromsearch=1
Build thread 2: "Red Daily" - http://www.redpepper...topic=55687&hl=

 

My Classic Honda Blog - http://genone-blog.blogspot.com/

 

Road & Track magazine: "When they get around to listing the top good-time inventions of the late 20th century, we're willing to bet that right up there with the hang gliders, ultra lights, sailboards and jet skis you'll find the Honda Civic CRX. And we're willing to bet that the CRX won't be at the bottom of the short list--particularly if the CRX in question is an Si."

#3
niccer
Posted 06 October 2016 - 08:50 AM

  • Slowpoke
  • PipPip
    • Group: 2014 Contributor
    • Location:Atlanta, Ga
    • Drives: '87 Civic Si, '11 F150 Ecoboost

That's the part you brought up last night that I need for Chedda's rear camber/caster plates.  I thought it was just a bolt that I could source from the parts store but it needs to be the whole driver's side rear spindle.


#4
CRXer87hf
Posted 06 October 2016 - 09:12 AM

  • Speedy
  • PipPipPipPip
    • Group: 2013 Contributor
    • Location:Atlanta, GA
    • Drives: 1987 Honda CRX HF, 1985 Honda CRX SI, 2003 Land Rover Disco
    Garage View Garage

Damn!  Well, nevermind then.  I may have a front one, but not a rear spindle.  Sucks about needing an extra drivers side spindle.  Guess I'll be needing one in the future too. 


Build thread: "Skittle 2.0" - http://www.redpepper...l=&fromsearch=1
Build thread 2: "Red Daily" - http://www.redpepper...topic=55687&hl=

 

My Classic Honda Blog - http://genone-blog.blogspot.com/

 

Road & Track magazine: "When they get around to listing the top good-time inventions of the late 20th century, we're willing to bet that right up there with the hang gliders, ultra lights, sailboards and jet skis you'll find the Honda Civic CRX. And we're willing to bet that the CRX won't be at the bottom of the short list--particularly if the CRX in question is an Si."

#5
del
Posted 06 October 2016 - 12:08 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 85 CRX hf, 85 CRX si

Use camber shims, save a bucket of money


#6
rallyxcrx
Posted 10 October 2016 - 12:54 AM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:oakland ca
    • Drives: 87 crx

They are available new from the parts store, Dave


#7
niccer
Posted 12 October 2016 - 06:42 AM

  • Slowpoke
  • PipPip
    • Group: 2014 Contributor
    • Location:Atlanta, Ga
    • Drives: '87 Civic Si, '11 F150 Ecoboost

They are available new from the parts store, Dave

 

I've checked the standard parts stores, including rockauto and can't seem to find where they're listed.  Any help would be appreciated if you know specifically what parts store carries them. 


#8
GeezRX
Posted 12 October 2016 - 10:52 AM

  • In the left lane
  • PipPipPip
    • Group: 2016 Contributor
    • Location:Beggs, Oklahoma
    • Drives: Only loaners at the present time!
    Garage View Garage

Well a quick search by Honda part number provided these two sites showing them available:

http://www.hondapart...10-SB2-010.html

 

http://www.bernardip...10-SB2-020.aspx

 

I'd be very surprised if they actually have them, however since the one is listed as coming through the Vintage Parts location...best of luck!


"Old and usually in the way" - Check out my '86 3G build in "VIEW GARAGE"

#9
niccer
Posted 12 October 2016 - 04:06 PM

  • Slowpoke
  • PipPip
    • Group: 2014 Contributor
    • Location:Atlanta, Ga
    • Drives: '87 Civic Si, '11 F150 Ecoboost

Cool site, I'll be sure to bookmark that one.  I assume that R. RR means right rear or something of that nature, which sucks.  Can't seem to get the great folks off the 3g/1g facebook pages that are parting out their cars to sell me theirs for some reason...  No candidates at the local parts yards either. 


#10
GeezRX
Posted 12 October 2016 - 11:37 PM

  • In the left lane
  • PipPipPip
    • Group: 2016 Contributor
    • Location:Beggs, Oklahoma
    • Drives: Only loaners at the present time!
    Garage View Garage

Sorry...I knew you wanted the driver's or left side and went and listed the passenger's side (See "Old and usually in the way"). On going back and checking specifically the LEFT side spindle, HondaPartsNow, the first link shows discontinued but the second link shows this side still "available" through Vintage Parts also so maybe...

http://www.bernardip...11-SB2-020.aspx

 

Part # 52211-SB2-020


"Old and usually in the way" - Check out my '86 3G build in "VIEW GARAGE"

#11
jsgprod
Posted 13 October 2016 - 06:45 AM

  • The Beach....The only place where salt LOWERS your blood pressur
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Florida
    • Drives: 2017 Camaro 1LE and 2001 F250 SD
    • Image Gallery

I have one or two of them under one of the workbenches in the garage.

Also have a complete HF rear axle (without the aluminum drums). I just have to pull it off the car.


If you love the Elise, drive a Se7en - Caterham or whatever...
It has even less content than the Elise, is less graceful looking
...and changes direction like a ping pong ball whacked by Thor.

scull+gif+1.gif

jsgprods Gallery

#12
niccer
Posted 13 October 2016 - 07:39 AM

  • Slowpoke
  • PipPip
    • Group: 2014 Contributor
    • Location:Atlanta, Ga
    • Drives: '87 Civic Si, '11 F150 Ecoboost

Thanks Geez!

 

 

I have one or two of them under one of the workbenches in the garage.

Also have a complete HF rear axle (without the aluminum drums). I just have to pull it off the car.

 

Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you. 


#13
CRXer87hf
Posted 13 October 2016 - 08:09 AM

  • Speedy
  • PipPipPipPip
    • Group: 2013 Contributor
    • Location:Atlanta, GA
    • Drives: 1987 Honda CRX HF, 1985 Honda CRX SI, 2003 Land Rover Disco
    Garage View Garage

Thanks Geez!

 

 

 

Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you. 

 

If you get two, I'll buy the extra one off you in anticipation of doing this same mod in the future!


Build thread: "Skittle 2.0" - http://www.redpepper...l=&fromsearch=1
Build thread 2: "Red Daily" - http://www.redpepper...topic=55687&hl=

 

My Classic Honda Blog - http://genone-blog.blogspot.com/

 

Road & Track magazine: "When they get around to listing the top good-time inventions of the late 20th century, we're willing to bet that right up there with the hang gliders, ultra lights, sailboards and jet skis you'll find the Honda Civic CRX. And we're willing to bet that the CRX won't be at the bottom of the short list--particularly if the CRX in question is an Si."

#14
rallyxcrx
Posted 13 October 2016 - 11:21 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:oakland ca
    • Drives: 87 crx

Rockauto has them, arp studs work in the Timken brand, but not all the cheapo ones, Dave 


#15
jsgprod
Posted 14 October 2016 - 12:57 PM

  • The Beach....The only place where salt LOWERS your blood pressur
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Florida
    • Drives: 2017 Camaro 1LE and 2001 F250 SD
    • Image Gallery

Thanks Geez!

 

 

 

Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you. 

I didn't get a chance to look for them yesterday, I will have plenty of time this weekend however.

I'll let you know.


If you love the Elise, drive a Se7en - Caterham or whatever...
It has even less content than the Elise, is less graceful looking
...and changes direction like a ping pong ball whacked by Thor.

scull+gif+1.gif

jsgprods Gallery

Back to WTB


  1. Red Pepper Racing
  2. → 1G Honda CRX/3G Honda Civic
  3. → Classifieds
  4. → WTB
  5. Board rules