26 replies to this topic

[bryman10]

Probably a long shot, but....

Looking for a 2G crx black or grey interior for a '91 DX. Must be in good shape.

Some bonehead outbid me last second on a nice piece on ebay

Calmoc9: I've got a set of 23mm t-bars in ULT1GCRX right now, w/ a set of 27mm's waiting to go in.....mmmmm....t-bar swap at the meet?



bryman

[crxls]

uh, isn't it the 22nd?

i want anything for an 88-91 DX 4 door!! axles, clutch, anything!!

<{POST_SNAPBACK}>

E-AT_me, my brother has a 88 civic DX sedan that he needs to get rid of. the rear crossmember broke while driving and did damage to the left rear section of the car (including suspension and control arm we think). the rest of the car is in great shape. odometer reads 273,000 or so but runs as strong as any stock civic i ever seen. no engine mods at all. was an automatic but we swapped it to 5 speed. the car is located in indiana pennsylvania 15701. he said he isnt looking to get much out of it, just to make him an offer and come get it out of his driveway if you are interested. all parts are there, just body/frame/suspension damage to left rear (severity of damage unknown). he said he might be interested in part out but i can guarantee you can take the whole car for less than what you would have to pay him to remove and ship. let me know.

here's a pic of it about a month or so before the incident happened

[E-AT_me]

oh man!! that thing looks 10x better than mine!!! hahahaaa. ok.. i'll see what i can do.. maybe rent a flatbed uhaul and pick it up if we can get it onto the trailer.. otherwise, i'll come and remove the parts i need if he'll part it out.. thanks for letting me know!!! i mainly need the alternator right now, would be nice to have a spare block/transmission, though.. and maybe a trunk and headlights..

[crxls]

oh man!! that thing looks 10x better than mine!!! hahahaaa. ok.. i'll see what i can do.. maybe rent a flatbed uhaul and pick it up if we can get it onto the trailer.. otherwise, i'll come and remove the parts i need if he'll part it out.. thanks for letting me know!!! i mainly need the alternator right now, would be nice to have a spare block/transmission, though.. and maybe a trunk and headlights..

<{POST_SNAPBACK}>

well you could deffinitely get it onto a flat trailer one way or another. im sure it would even drive onto a trailer if you throw a battery in it but if not our stepdad has equipment there that could do the job. he lives with my mother and stepdad and they are on his ass to get it out of there. engine and trans in 100% condition (dual point injection ). only body damage i know of is a small dent in the trim piece under the drivers side headlight, a dent in the drivers side rockerpanel by the front jackpoint and i think a really small ding (probably not worth mentioning, thats how small) right on the corner of the trunk lid where it curves down. rest of body doors and fenders and all that are great. interior is in decent condition also. i guess the pic speaks for it.

Edited by crxls, 20 October 2005 - 10:25 AM.

[kedwards]

I will try to bring the DX sedan rear reflectorized panel I have. I found it was different than the LX and EX use, so it doesn't fit my mother-in-law's '90 EX,

I will also bring the white '86 Si breadvan grille I picked up for Joey, a few months ago.

Keith

[mep]

I will also bring the white '86 Si breadvan grille I picked up for Joey, a few months ago.

<{POST_SNAPBACK}>

I might be interested in that piece if no one else claims it... I'm pretty sure E-AT_me could use one of those pretty badly too.

[E-AT_me]

i still can't get one to fit.. i tried one off of ebay again, it still doesn't work. i don't know what's up.. oh well. i'll find out at the meet!

[kedwards]

I will also bring the white '86 Si breadvan grille I picked up for Joey, a few months ago.

<{POST_SNAPBACK}>

I might be interested in that piece if no one else claims it... I'm pretty sure E-AT_me could use one of those pretty badly too.

<{POST_SNAPBACK}>

We can make a deal, if we can't teach Joey how to make it fit...

Keith, doesn't actually know much about fitting one for a Civic...

Edited by kedwards, 20 October 2005 - 07:04 PM.

[calmoc9]

Calmoc9: I've got a set of 23mm t-bars in ULT1GCRX right now, w/ a set of 27mm's waiting to go in.....mmmmm....t-bar swap at the meet?



bryman

<{POST_SNAPBACK}>

i thought you were selling the ult1gcrx? those 27 sound really good. for me that is. wanna play lets make a deal? if not the 23mm would fit the bill also.


scott<-------- will whore himself out to the ladies of nc for those 27mm t-bars.

[kedwards]

Calmoc9: I've got a set of 23mm t-bars in ULT1GCRX right now, w/ a set of 27mm's waiting to go in.....mmmmm....t-bar swap at the meet?



bryman

<{POST_SNAPBACK}>

i thought you were selling the ult1gcrx? those 27 sound really good. for me that is. wanna play lets make a deal? if not the 23mm would fit the bill also.


scott<-------- will whore himself out to the ladies of nc for those 27mm t-bars.

<{POST_SNAPBACK}>

Both of them?!?

I think I have the parts I am bringing packed for the trip, though I won't be headed down Friday night, as previously planned. I expect to leave Va. early Saturday.

Keith, who lived in N.C. for 5 years, and I don't remember many "ladies"...

[MakDiesel]

Updated my "Gonna Bring" list (the 1st post of this thread). It all fit in my car, but not without some cursing. See you guys in a few days....Mak <--------- stoked some kind of hardcore

[E-AT_me]

i'm ready... let's DOO it.. anyone want some ugly mugen CF-48's? hahaa.. j/k..