Jump to content




Torsion Bar Height Adjustment Bolt Replacement?


  • You cannot reply to this topic
4 replies to this topic

#1
na-spirit

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 86 Civic si. 01 Integra Type R

Well lesson learned that I should of indexed my torsion bars before going so low. I stripped the threads off the bolt and nut. Luckily I found replacement ones.

 

As far as replacing the Height adjustment bolt, I assume I'd have to lower the subframe? please let there be another way ha... 

 

Thanks for the help!



#2
na-spirit

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 86 Civic si. 01 Integra Type R

Nevermind I got it! Just had to punch it out from bottom and pull it up from above... I had to pay 45 bucks shipped just to get a new bolt and nut lol. How it goes sometimes.



#3
CSPCRX

Sorry to hear this!  Where did you find new ones?


Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack

85 CRX DX totally original
07 Harley FXST Softail

2021 Tacoma Tow/Daily


#4
na-spirit

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 86 Civic si. 01 Integra Type R

ebay..had to buy a whole integra tube just to get the nut and bolt. Seems like I could just swap out both for longer bolts, then indexing wouldn't be needed. Oh well I'll just do it the correct way now.



#5
CSPCRX

Indexing is absolutely the way to go!


Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack

85 CRX DX totally original
07 Harley FXST Softail

2021 Tacoma Tow/Daily