Jump to content




Spherical Torsion Bar And Spherical Control Arm Group Buy


  • You cannot reply to this topic
34 replies to this topic

#1
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
The torsion bar spherical conversion will be $200.00.

This will include the following:

2 aluminum adapter sleeves
2 double sealed spherical bearings (pressed in)
2 grease nipples (including shields and nuts)
2 torsion arm spacers
2 retaining bolts
Drill bits and Tap


The control arm kit is $200.

This kit will include:

2 aluminum adapter sleeves
2 double sealed spherical bearings (pressed in)
4 retaining bolts
2 grease nipples
4 inner adapters
Drill bits and Tap


As a group buy were are going to do these two sets for a total of $375.

For those who are getting the trailing arm kits at the same time, they will be $175-$25 discount for a total of $150 + $375 = $525.


Please send all deposits to [email protected] via www.PayPal.com

To see the entire thread about how these are made and tonnes of photos including install please visit the page below. Entire kit photos will be added to this thread as they are built.

http://www.redpepper...opic=54250&st=0

Group Buy Members:


Aren D. deposit paid
Dwend (full kit) Paid deposit paid 12mm
87MugenProCr-X deposit paid

Power Wheels deposit paid +
ATXBoy (full kit)
Vicious (full kit)
Cahitapower deposit paid
Anjin (full kit)
TimmyDogg

ED Funk deposit paid for two sets $500

Posted Image

Posted Image

10395168_748294558578686_901304337744719


#2
fat_85_civic

  • In the left lane
  • PipPipPip
    • Group: 2012 Contributor
    • Location:Wollongong, Australia
    • Drives: 85 Civic 1500S - ZC converted
    • Image Gallery
    Garage View Garage
I'm not going to be able to go on on the gb, but you'll be continuing to make these like all your other items yes? Because one day I will have the money.

Sent from my GT-I9000 using Tapatalk 2

#3
anjin

  • redlinefever
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:Perth, Western Australia
    • Drives: 83 crx - kakaburra,83 gen1 Noir, 87 EF7 Glasstop crx, 83 gen 1 rebuild replica mugen racecar
    • Image Gallery
    Garage View Garage
deposit is in.
anjin aka Ian

"I can't believe it - Ive just been passed by a sh!tbox"

#4
Aren D.

  • Save the pepper, save the world.
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Tooele UT
    • Drives: 1985 CRX SI/2003 Frontier SC/2006 Jetta TDI/2014 Civic SI
    • Image Gallery
    Garage View Garage
just sent in the deposit!

#5
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Thanks everyone, looking for just a couple more before I can order the materials. The lists have been updated to show who has put money down.

10395168_748294558578686_901304337744719


#6
Ed Funk

  • Slowpoke
  • PipPip
    • Group: 2015 Contributor
    • Location:Massachusetts
    • Drives: ITA CRX, ITB Civic, ITB CRX, HP CRX, Del Sol, BMW 325is, Ford F250,"bug eye" Sprite, Mustang 5.0, Rav 4, BMW 1100RT, BMW 650CS
In for 2 sets. But don't know how to send deposit.
Former driver, current pit bimbo.

#7
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Oh shoot I forgot to add my PayPal email. It's [email protected] . If you don't have a PayPal account, they are very easy to set up and 100% secure. Just visit www.PayPal.com and when you pay please include what your purchasing in the bottom heading.

10395168_748294558578686_901304337744719


#8
cahitapower

  • In the left lane
  • PipPipPip
    • Group: 2010 Contributing Member
    • Location:Queens, NewYork
    • Drives: 1986 civic si
Chedda i will make my deposit next Wednesday, I just came back from Vacation and had some bills to pay...but will be in next week for sure...
So MuCh In SUcH A SmALL BoX

Project Build "CahitaPower"

#9
PowerWheels86

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2015 Contributor
    • Location:Houston, TX
    • Drives: 1986 CIVIC Si
    Garage View Garage
wait how much is the deposit?
Dark Side of the Power........
Posted Image


Wheels

QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)

#10
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Deposit is $150 to essentially pay for the materials. I will make them and expect the rest when each kit is completed.

10395168_748294558578686_901304337744719


#11
PowerWheels86

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2015 Contributor
    • Location:Houston, TX
    • Drives: 1986 CIVIC Si
    Garage View Garage
in that case, can you add me to the list? i'll be able to send a deposit next week.
Dark Side of the Power........
Posted Image


Wheels

QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)

#12
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Added big guy

10395168_748294558578686_901304337744719


#13
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Here's a couple photos of the redesigned rear trailing arm sphericals. These are just the housings, but I will have some updated photos soon.


Posted Image

Posted Image

10395168_748294558578686_901304337744719


#14
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Ahh well I'm still waiting on materials sadly. They F'ed up real bad ended up charging me three different times. Once for $411, then for $540, then for $411 again. Trust me I was not happy when I went to go use my visa and I was out of money. So we got everything straightened out and the materials are finally being shipped. They also had to do allot of processing with this order, as I had all the materials cut to length rather than me doing so that when I receive the materials I can blast right through making them allot faster (no cutting).

I got some of the kits packaged. Here is a photo.

Posted Image

I will keep everyone up to date, thanks for the patience.

10395168_748294558578686_901304337744719


#15
anjin

  • redlinefever
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:Perth, Western Australia
    • Drives: 83 crx - kakaburra,83 gen1 Noir, 87 EF7 Glasstop crx, 83 gen 1 rebuild replica mugen racecar
    • Image Gallery
    Garage View Garage
When do you want the full payment?
anjin aka Ian

"I can't believe it - Ive just been passed by a sh!tbox"