Jump to content




245S


  • You cannot reply to this topic
17 replies to this topic

#16
CSPCRX

The shims that look like body shims are still available. I was actually thinking of using some of the 1/32 to find out how much I need to get the camber how I want it.  Then make some flap stock plates to go in permanently.


Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack

85 CRX DX totally original
07 Harley FXST Softail

2021 Tacoma Tow/Daily


#17
CSPCRX

Got tires mounted today and spacers for the front showed up.  Need to pull the studs on the spacers and finish the brake kit so I can mount them up.  I am excited about how well these are going to look.


Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack

85 CRX DX totally original
07 Harley FXST Softail

2021 Tacoma Tow/Daily


#18
CSPCRX

some pics next on the car.  Got the studs pressed out of the spacers just need to wrap up brake project.

 

50672627623_db5ba712e4_c.jpgUntitled by Victor M, on Flickr

 

Interesting how a 205 is so close to a 225. You would think 20mm is 20mm.  This is the 205/50 Proxos that I have run for years, square setup, vs the AR1 225.

50673457282_01ae663e69_c.jpgUntitled by Victor M, on Flickr

 

Now the fronts vs rears. 245 AR1 vs 225 AR1

50673373376_fb64254032_c.jpgUntitled by Victor M, on Flickr


Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack

85 CRX DX totally original
07 Harley FXST Softail

2021 Tacoma Tow/Daily