ITS THE WHOLE PRELUDE WITH CARBON HOOD ECT,ECT,ECT....WE PARTIN HER OUT...F22 IN OUR KINDA CAR WOULD BE VERY UNIQUE IF DONE....PM ME WITH OFFERS
I have a 92 d15 complete engine...ill part anything for yall...
I also have old carbs from a20a1 engines and a d13 complete ingine in pieces i will part or sell whole..ok so let me know...also a dash bord and rear inside panels...
make offers...
*Complete 86 1.3 engine (will part out.)
*A20A1 (accord)head.
*A20A1 (accord)valve cover.
*92 civic (EG)D15B engine (will part out.)
*86 civic HF complete dashboard and panels,ect.
*95 d15 (JDM)PS.
*84-87 civic bumper supports.
*(2)HF/DX valve covers.
*Carbs and parts.
*Civic DX emblem.
*90 CRX SI ECU.
*92 CIVIC (EG) ECU.
*84-87 carbed emissions stuff.
*ect,ect,ect.....
let me know yall....TOM
Hey all...I am currently doing a bike carb set-up and won't be needing this keihin 2 barrel...it's been modded to mechanical secondaries and will give you a power difference from stock...the intake is a 1.3 ev1 it will fit a 1.5 carbed or si...
Also I have this carbed dizzy...also have a complete 1.3 and other parts..just ask...
Check these out though and make offers...thanx..TOM
2
Cleaning Out Garage
Started by lilneedle, May 12 2006 12:30 AM
100 replies to this topic
#1
Posted 12 May 2006 - 12:30 AM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#2
Posted 12 May 2006 - 12:41 AM
QUOTE (lilneedle @ May 12 2006, 12:30 AM)
ITS THE WHOLE PRELUDE WITH CARBON HOOD ECT,ECT,ECT....WE PARTIN HER OUT...F22 IN OUR KINDA CAR WOULD BE VERY UNIQUE IF DONE....PM ME WITH OFFERS
what condition, mileage and year is the engine? is it hooked to an auto or manual trans?
When I die, i want to go asleep peaceful.......... not screaming and freaking out like everyone else in the car
"i left the bar a little after you and ended up flipping my car in the arbys drive thru"
IM A LOSER!!! my car pulls harder when spinning than any "highly modified" EW
Team BUrnOUt founding member
"i left the bar a little after you and ended up flipping my car in the arbys drive thru"
QUOTE (cbstdscott @ Dec 10 2008, 03:27 PM) <{POST_SNAPBACK}>
Another loser who can not get traction. I feel sorry for him.
IM A LOSER!!! my car pulls harder when spinning than any "highly modified" EW
Team BUrnOUt founding member
#3
Posted 18 June 2006 - 01:01 AM
QUOTE (lilneedle @ Jun 18 2006, 12:39 AM)
also a dash bord and rear inside panels...pm me TOM
for the rex or hatchie or wagon or the sedan?
Do you have the intake and carb for the d13?
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#4
Posted 18 June 2006 - 02:14 PM
yea...if yu go on my page:lilneedle on cardomain.com its on one of the last pages... make me an offer...pm me..
well folk ..I have decided to go back to a single carb set up..so if anyone wants to trade a good accord carb,weber,or devact carb for my si intake modded to kiehin bike carbs off a cbr hurricane got lots of potential...they are very clean. I will also take 87 D15A2 block,crank,and rods.
*86 SI head,distributor.
*86 SI intake modded for bike carbs,2 inch intake runners.
*87-90 honda CBR600,keihin 32mm carbs w/elect. pump and reg.
*HF exaust manifold with gutted CAT and mozart exaust.
*MSD blaster coil
*advanced timing...what ya think now????TOM redline? HP? TORQUE? 1/8 TIME??
50 bucks
let me know...
well folk ..I have decided to go back to a single carb set up..so if anyone wants to trade a good accord carb,weber,or devact carb for my si intake modded to kiehin bike carbs off a cbr hurricane got lots of potential...they are very clean. I will also take 87 D15A2 block,crank,and rods.
*86 SI head,distributor.
*86 SI intake modded for bike carbs,2 inch intake runners.
*87-90 honda CBR600,keihin 32mm carbs w/elect. pump and reg.
*HF exaust manifold with gutted CAT and mozart exaust.
*MSD blaster coil
*advanced timing...what ya think now????TOM redline? HP? TORQUE? 1/8 TIME??
50 bucks
let me know...
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#5
Posted 18 June 2006 - 02:15 PM
outta a hatch
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#6
Posted 18 June 2006 - 02:20 PM
does it really have mechanical secondaries?
#7
Posted 18 June 2006 - 04:30 PM
Yes it is and it will give ya some good power for it is... so what ya want to pay????
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#8
Posted 01 July 2006 - 01:06 PM
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#9
Posted 01 July 2006 - 01:26 PM
I fyou pay shipping....get back to me...its worth 20 TOM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#10
Posted 01 July 2006 - 01:28 PM
QUOTE (lilneedle @ Jul 1 2006, 01:26 PM)
I fyou pay shipping....get back to me...its worth 20 TOM
Yeah, that would be $20 + what ever shipping is
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#11
Posted 01 July 2006 - 01:31 PM
lets do it...pm me with your info and getting me shiiping $$$
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#12
Posted 14 July 2006 - 11:05 PM
I have a 1.3 to part out,a 92 d15 to parts out and stuff I pulled for weight reductions outta my hf 3g so hit me up ...also have 1.3 cam for regrind for all you hi reving 1.3 builderz...TOM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#13
Posted 15 July 2006 - 03:49 PM
wut kind of d15 parts are we talking about here??
plz make a list if u dont mind
thanx,
-Glenn-
plz make a list if u dont mind
thanx,
-Glenn-
#14
Posted 15 July 2006 - 04:55 PM
*87 D15A2 block,crank,and rods.
*86 SI head,distributor.
*86 SI intake modded for bike carbs,2 inch intake runners.
*87-90 honda CBR600,keihin 32mm carbs w/elect. pump and reg.
*HF exaust manifold with gutted CAT and mozart exaust.
*MSD blaster coil
*advanced timing...what ya think now????TOM redline? HP? TORQUE? 1/8 TIME??
*86 SI head,distributor.
*86 SI intake modded for bike carbs,2 inch intake runners.
*87-90 honda CBR600,keihin 32mm carbs w/elect. pump and reg.
*HF exaust manifold with gutted CAT and mozart exaust.
*MSD blaster coil
*advanced timing...what ya think now????TOM redline? HP? TORQUE? 1/8 TIME??
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#15
Posted 15 July 2006 - 06:30 PM
nah thats ok lilneedle. i thought u mighta had sum parts for a b2 or a6
thanx anyways ,
-Glenn-
thanx anyways ,
-Glenn-