I saw a guy at the track who was running s2k front brakes on his 2g crx. The 2g crx calipers mount directly on our cars, so they will either bolt right up or use the same adapting method.
Oh nice! What size rims did he have to run to clear everything?
If you're looking for ZDDP, I know Valvoline VR1 has a good amount of it. Not sure of exact numbers though. Though, I usually see it is either 20w50 or SAE60. Personally, I use 1qt of Lucas and the rest 10w30 Oriellys house brand(supposed to be provided by Valvoline). My trans is the original for the car and has 512,000 miles on it, never rebuilt as far as I know so thicker stuff is probably a little better for mine. I don't hear any noises and it seems to run just fine with it.
I put a '96 seat in my '85 sedan. Actually didn't take a lot of modification. The inside only took a small bit of work with the die grinder. The outside needed the rear mount cut off the old seat and bolted in place of the flat one. Works good, but I find the seat sits a bit higher than the old one.
That's pretty cool. Opens the door for more aftermarket seats.
Sign In
Create Account
Find content
Male
