All of these parts are 86-89 integra and/or D16A1:

GC Coilovers $150 SOLD
Rota Grids 4x100 (4) 16" $350
Stock Axles low miles(2) $60
Stock Distributor $60
ITB system $EBAY
AEM Adj Cam gears $125 SOLD
Optima Redtop batt $60
MSD 6AL, cap, coil $125
ZC cams $125
WEB racing camshafts $150
Monster Tach $90
3gauge set (oil pres,temp) $70
Stock ECU $50
Cometic Headgasket $50
Ostrich ECU tuner $EBAY
Clean chassis/shell $300
Set of floormats $30

Let me know guys

Price's w/o shipping... see something you like let me know we can probably come to terms on it.
I cannot reply but PMs are sent asap.

Thanks

NP, thanks!

PM sent

MEGA PARTS SALE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

•High performance transmission - rebuilt, 0 miles, custom 4.993 final gear, OPM LSD $$PM ME SOLD
•5pt Harness $50 SOLD
•Starter $20 -SOLD
•ARP head stud kit - used, good shape, $40 -SOLDDDD!!!
•Sylvania silverstar headlights $40 SOLD
•Stock spec ign wires $15 SOLDDD!!!
•Moroso 5qt oil pan, alluminum, has a hole in it that can be repaired... $50 -SOLD
•PLX Dm-5 wideband 02 sensor w/ afr gauge $225 SOLDDDDDD
•Oil catchcan $15 SOLD
•Cam sensor on exhaust cam $20 SOLDD
•Distributor #1 SOLDD
•ZC head - milled .055 -> 10.8-11:1 compression, slight porting, inc cam caps & rockers $150 SOLD
•Gude cam shafts - race spec camshafts, lumpy idle, top end power $200 SOLD
•Stock transmission - excellent cond, no grinds etc $150 SOLD
•ZC cam shafts - good ole ZC cams $150 SOLD

•Suspension tech rear sway bar $80 Pending
•AEM adjustable cam gears - 5bolt design, no slippage worries $180 for the pair Pending
•Gude ported, TB opening enlarged Intake manifold w/ enlarged bullfrog TB $170 Pending

•Web camshafts - race spec camshafts, lumpy idle, very strong midrange $200
•Alluminum racing radiator - griffin racing rad, highflow and efficient cooling - comes w/ 2 slimline fans w/ connectors to hook up to the stock wiring-includes hoses to hook up to the D16A1...you'll need to make your own brackets $200
•g1teg intermediate shaft 5spd $20
•Gude racing spec head - milled head, extensive porting job, enlarged ports, 11:1 compression, very clean..inc cam caps, rockers etc $200
•Stock head - oem inc cam caps & rockers $50
•Stock camshafts - good as a regrind core $30
•Distributor #2 $80
•MSD 6A multiple spark discharge unit w/ modified MSD dizzy cap & MSD coil and wire $160
•Cometic MLS headgasket $80
•Optima redtop battery $80
•Stock intake manifold $40
•ITB setup w/ adapter, hondata heatshield gasket, adjustable fpr, fp gauge, etc etc $500
•D16A1 block w/ internals, alternator, oil pan, flywheel, pulley...good engine, ran strong, could throw a head on it and go or rebuild it and make it into a monster..high mileage $60
•Stock ECU $40
•Spunkster modified 88/89 ecu, chipped, socketed, serial port allows datalogging, comes w/ serial to usb cable $140
•Ostrich EMU...allows on the fly tuning of your ecu when used w/ turbo edit $150
•Autometer monster tach 10k rpm bitches vtak $100 GET YA VTAK HERE
•Gauge set water temp, oil temp, oil pressue $100

MORE PARTS ON THE WAY
IF ITS NOT LISTED, I MAY HAVE IT - JUST ASK

ALL PRICES OPEN TO REASONABLE NEGOTIATION

NO LOWBALLERS

SERIOUS BUYERS ONLY PLEASE

PRICES DO NOT INCLUDE SHIPPING

PM ME FOR SPECIFIC DETAILS AND PICS OF THE PARTS YOU WANT

WILLING TO DO PACKAGE DEALS IF YOU BUY MORE THAN ONE PART

Send me a PM or email me...

Papa needs vacation money...

PLEASE NOTE THESE ARE D16A1/Integra PARTS


Hey everyone, I will be overseas 7/28 and returning 8/22 on business / pleasure trip. If you are interested in parts let me know ASAP, so I can send them ASAP, otherwise it will be until near September before I can resume selling. Thanks.

Information:
Itbs: Suzuki GSXr 600 ITBS - 42-40mm, perfect sizing comparable to DCOE40s
Manifold: Modified and cleaned up OBX sohc D tubular manifold

Comes with Velocity stacks, throttles, manifold, couplings, adjustable FPR, oem civic fuel rail, fuel injectors, fuel pressure gauge, vacuum hosing, vacuum log, adapter plate, hondata heatshield IM gasket, all fittings, nuts and bolts needed for proper installation to head/adapter plate.

I recommend tuning with OBD1. It is doable w/ OBD0 and mapsensor but will be difficult and time consuming.

ITB'ed engine was able to run with the stock ECU running in limp mode, which attests to the quality and proper sizing of the ITBs for this engine. With OBD0 was able to tune idle and part throttle.

The modified fuel rail pictured will not be included. I don't feel it is safe, and am not comfortable sending someone a modified fuel rail that could potentially leak.

Video of the car running w/ ITBs & limp mode


$500 + shipping???


One clarification...the manifold itself is for a sohc D series, I made an adapter that allowed me to install the sohc manifold on a dohc head. So if you have a sohc you don't need the adapter, and if you have a dohc you do.

No cracks, dings, dents, holes etc... just dirt and grease..

$190 + sh???????????


SOLD!

As the title says...new in wrapper...

$80 shipped




.040 thickness

Goood dealllll!!!!!

Aftermarket or factory?

Pm sent

PM sent

I have some GC coilovers if you are interested in adjustability....

PM sent

Hi everyone,

I'm the owner of a 88' Integra and a mod over at www.g1teg.org. I've owned this integra for 6 years and during that time put a lot of money into parts and modifications to make it my little racecar. I've recently purchased a new car and have been too busy with work and college, and have lost interest in my integra and in racing it. I tried to sell the car, but no one wanted to pay the perceived high price. So I decided to begin parting it out. These are just some of the first parts I pulled so there are plenty more on the way which I will post as I remove.




ST rear sway


$90 Prefer local buyer, will ship.


MSD sparkplug wires...



about 6000 miles on them. Original cost ~$80.

$45 shipped


PLX DM-5 AFR & SM-AFR



Practically brand new, in box.
I installed it on the teg, ran it for maybe a total of 6-8 hrs - used it to tune for ITBs.

Includes:
-Wideband 02 Sensor (Bosch)
-Sensor Module
-02 harness
-AFR gauge fitted with honda 02 connection
-Sensor bung, extra connectors etc
-Instructions
-OEM 02 sensor

Bought it for ~$270, selling for $225 Shipped


OSTRICH Emulator 2.0

This is the newest Ostrich, the 2.0 unit. It is extremely small and compact, durable, versatile, and powerful. Full 921.6k speed, from 4k (2732A) up to 512k (4mbit 29F040) and everything in between (27C128, 27C256, 27C512).

This is used for on the fly programming.



Paid $185 for it just a few mo ago, used it for about 6-8 hrs...for sale $150 shipped

Programmable chipped/datalogging ECU
88-89 teg ECU, chipped and socketed. You can either burn and swap chips or use the emulator to program on the fly. Also has a MAX323 port installed for datalogging. Comes with a serial to USB cable for easy connectivity. Also includes the MUGEN program chip, and a turboedit turbo basemap chip.




Slit made in top so emulator could be used w/ closed case.

$140 shipped


Stock 88-89 ECU


$40 shipped


Sparco steering wheel off the integra.

The felt outer layer was coming apart, so I removed it and put the wanna be leather wrap on it. Thick ring and small diameter - was fun for swinging the teg around in autocross.

Comes with the autozone grant steering wheel adapter assembly, plus a custom plate for mounting the sparco steering wheel to it.

Only issue is that the left horn button requires replacement, but its a simple push button that you can buy at radio shack for like $1.50.







Thanks for looking. PM or email me maan1986 at gmail dot com.